Recent content by Shant10

many thanks mate, will try that .... you can get removal keys for every other bloody make except LR !!!!!!!!!!!!

hi friends, as a side question, any idea where I can get the 2 removal keys so I can check the wiring on these things ........... similar problem on mine, no sound, just constant buzzing

hi friend, I had exact same problem myself , and was indeed the compressor ..... no warning becos the "elastic" is broken (in the compressor), but is still trying to work and computor thinks all okay .. they are 200 quid+ at LR

hi friend, I have just upgraded my RF receiver to the new style one, becos the old style kept reading signals from houses/cars down my road, and hence waking up the becm when locked/closed up and draining the battery every 2-3 days. You may not have this problem, so if you want an old style...

Just went and bought the updated version, so hoping alls well from now on. Should be, as I had the old one unplugged for the week preceeding the new one being fitted - £122 + vat

try rimmer bothers (bros) .... they carry an extensive range of parts

cheers brookediamond, I did think about doing that, but all the hassle if you forget to flick the switch etc etc, but you are right, worth considering given the cost. Mind you, its a one-off £150 (famous last words!).........

dont worry, if I fork out the 150 quid, which I suspect I will, I will make sure its the right part!!!!!!!!!!!!!!!!!!11. That said, the people in the Hunters (Guildford) parts department are very helpful, especially one of them ... always helps if you stick with one fella in these places...

I know its a very obvious suggestion, but I have seen something very similar on the ebay site a few times, and some people on there are willing to swap also ... good luck mate

cheers mate ............... have unplugged the receiver already, and have left for a couple of days, and the battery has not run down at all ............ that was my test !! ........ but no matter how close I am to the door, the remote does not work, so I use my access code to start engine, so...

I must admit, I have never seen the comets, but I have 18" Triple spokes on my 4.6 HSE, which I would like to swap ..... but added to this, they are not in that great a condition and could well do with an alloy repairer doing hit stuff on them. That said, repairs in your part of the country are...

Hi friends, just did a few tests on my battery (regarding the 2-4 day drain), and it is indeed as most of you experts out there predicted, the rf receiver for my remote control. By the way, got a 1997 P38 4.6 HSE. Just rang up my local LR dealer, and he quoted me £122.00 + VAT .... so...

thanks very very much wantaquad, that is a great help, as I have had it unblocked from underneath, but now sort it once and for all .... very informative, many thanks ... sorry for delay of reply!

bingo...... we have music. followed the instructions to the T and it started straight away take fuse F1 out while ignition off, then replace, then turno on ignition, you will see 4 lines .. then press bnd and man (in between up/down buttons and CODE IN will appear, pop in the numbers...

got this off another site To force the radio to let you enter a code, hold down the BND and MAN button on your stereo for 2 seconds. If you entered the wrong code, and that (wrong) code is still displayed, REMOVE AND REPLACE FUSE F1 (fuse panel on front passgr seat), then turn the key to the...