Recent content by Scotch543
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
As the title suggests I'm after the diameter of the radiator hoses on a 1.8k Freelander MK1... Searched the net with no success so I'm asking your guys.
Thanks in advance
-
No unfortunately not in both counts happened so quick couldn't get the reg. We will definitely get her sorted. Just maybe not in time for the Peterborough weekend which is a bummer but not much we can do.
Onwards and upwards
-
Thanks yea we where both completely fine. Not a scratch between us. Mrs was a little stiff for a day or 2 for the brunt of main impact was her side as she was driving. Pictures don't do justice to the level of the crash to be fair. If we had been in a normal car. We would have broken bones...
-
So we took 'hetty' on the 4 hour drive to Billing off road show, and she didn't miss a beat. We had a great time got some new parts for her and was a cracking weekend.
Then the journey home.... Thanks to some F*****g W****r driving a small yellow van flying off a slip road almost smashing into...
-
Yea we are really happy with that just guna work through getting the chassis cleaned repaired where needed and sealed etc oil leaks one has been sorted with a new crankshaft seal ... The others will get done as and when.. Hasn't left any oil in drive yet so they arnt bad at all
-
Yea new hubs on her list of parts needed so it'll be done in fairly soon.
-
Removed the sensor for the third time so I could clean top of the hub where it mounts back tk bare. Metal... I plugged the hole with tissue.. And sanded by hand.
Before
After
Tightened up nice and tight with a spanner... And after a fair bit of driving... Problem solved ... So if your...
-
So at 8am this morning I took out the sensor again and sanded down the are it mounts to bar to barew metal.
Before
After
So much cleaner... Then I re-fitted and tightened down tight with a spanner to get it as low as it would go...
After a fair bit of driving round it is now working as...
-
Thanks for the link . And the advice. I'll definitely get a hub ordered. I'm taking tools to billing so if it passes the mot and I see one there I'll be fitting it there and then haha
-
Glad its not just me. With this luck then
-
Small update.. New abs sensor came this evening....
cleared the fault for all of 5mins and its back...
Re stripped the hub checked it all over all seemed good re-f1itted and fault still there...
Plan is to strip it again first thing tomorrow.. Done it that many times I can strip it to...
-
Update....
Fitted the new sensor and got this...
A nice dash with no lights.... But sadly was short lived...
As withing 5mins of driving round and it looked like this again
So I stripped the hub down pull sensor to inspect for dirt.. Bit of grease but nothing major and put back I. And...
-
Yea I'm more then happy with mine seems good quality and like I say has changed my welding game. Competely
-
Recently upgraded my old Clarke 151EN to a euro torch conversion few weeks back... And what a difference it makes! Can still use it for gas welding and gasless.
Due to windy conditions on the dirve I recently repaired my GF's discovery rear chassis leg, using flux core. And the results where...
-
Ha dit on a machine New sensor ordered from amazon.. Bargain price aswell was getting daft quotes from lost places local to me.
So while that's coming I wasn't overly happy with an exhaust mount I clocked the mm other day so cut it off cleaned up and re welded back on.
Job done..
Upgrading...