Washed the accumulation of old dried on oil and grease from under my LHD P38 and checked brake pads, diff oil etc ready for the MOT. Oil and filter change still to do.
Well it's actually 35mm.. i think i got mixed up with the 36 on my bike!
Found an equivalent that fits!! Crikey some of these nuts are a bit tight with rust
Flip.
Dug out my 36mm socket to start on the front axle.. it's a 32mm! Bugger
My other 36mm is 6 point so that's not going to fit
Jobs over before it's started. As usual
😇 cheers Range Roller, it's very nice of all the lads to say hello and has made my day . Everybody seems to be still involved in helping each other out, which was the reason it was all set up originally and after all this time ids as strong as...
HI BRIAN ,SO SORRY TO HEAR ABOUT DOPEY , I STOPPED COMING ON HERE AFTER LOSING WAMMERS FIRST THEN SENOR ALAN FROM THE WIRRAL . ITS ALWAYS A SAD SAD OCCASION FOR EVERYONE SOMETIMES ITS HARD TO DEAL WITH . OK MATE THANKS FOR LETTING ME KNOW, KIND...
No way the other would fit.
Was it you or Bagshot sent me something for the P38 wrapped up to look like a black mamba? The look on the postman’s face was one of absolute filth!
Update
I went to drop the tank but I decided to lift the back seat.
I found a cut in the floor.
Someone had went at it..
So I continued to remove sender..
The 2 nuts were a nitemare to remove, they were in bad shape..
I got them wit a lot of...
WHO ARE YOU GRATCH ??? NEVER HEARD OF YOU ??? PLUS I AINT SHOUTING I HAVE TO USE CAPS FOR A REASON , IF YOU KNEW ME YOU WOULD KNOW WHY . BUT HEY HO LIFE CARRIES ON. REGARDS MOZZ. 😇
OH I matey, thank you for asking, an awful has lot has changed in our lives but still fighting and stomping around in the bus☝️🤩👍..
I trust you and yours are doing good also? 😊
When the carbon build up in the manfold on my disco caught on fire and burnt a hole in the plastic manifold and i got a used one i blocked off the egr and ran a can of manifold cleaner through it the crap that came out of the exhaust caused a...