Rubberknees's latest activity

Hi Welcome back to the asylum 🤣 Hope u and the family are keeping well

HI MARK ,GOOD TO SEE YOU STILL ON HERE HOPING YOUR ALL WELL CHEERS MOZZ

Hi Keith so good to hear from you ,hoping all is good over the water cheers mozz

Hi fella yes mine gone too hoping yiu and your family are all well cheers Mozz

Now then lad😜👍

Hi Mozz good to see you are still about. My Rangies gone but I still get to enjoy the others’ breaking down

HI FELLA ,THANK YOU , HOPE YOU AND YOURS ARE ALL OK AND GOOD , CHEERS MOZZ

HI KERMIT , MANY THANKS ,HOPE YOU AND YOUR FAMILY ALL OK , MOZZ

Nope,160mph..its been chipped and has cup holders and its a dhse, H stands for high performance. And most of the lacquer has felled orf so she's loads lighter too. True story.

Hiya Mozz hoping you're keeping well. Good to hear from you

Hello, nice to visit you all it's been awhile since i was on l ast hoping you are all well and still enjoyinyour rangies . Kind regards Mozz

I can hear every note from every instrument under the bonnet. One out and I touch cloth.

Fixed that for you, unless you were freefalling from a Herc.

I did 160mph in my p38 with the sunroof fully open and the wife got sucked out. Venturi effect I believe, she was not amused.

440 on the P38A.

It's off my scrapper, it was full of water rom the cracked head and rusted solid, I took it apart just to have a look.

If all else fails there is always the 240 air con (2 windows open 40mph )

Here you go.

I have got a turbo in bits on the bench, it's surprising how much gunge there is on the intake side.

May be a sticking wastegate and the cleaner cleared the gunge out

Never thought of that. Bit surprised it did anything as it has enough oil going through it.

Fixed that for you.

In my opinion yes it is .

I was just reading that... https://paulp38a.com/range-rover-p38/heater-core-replacement-audi/ Is it a neat job? I don't like cutting stuff up if I can avoid it....!

I changed to the Audi matrix without taking dash out. Visit PaulP38.com very good write up with photos on how to do it

My heater matrix on my P38 is currently leaking from the o rings after we changed the radiators. Is it an easy fix ?

Just take your time and short bursts and its amazing

I'll have to try some of that.

Been for a good run round and the difference is very very good

If you lot hadn’t drilled the fact you take the filler out first into me the situation would have been far more severe 👍🤭 Oh and don’t put green stuff on your gearbox plug threads. That too 🫣