Recent content by RogNog

yep and it did make a slight improvement. I have decatted, removed the EGR and got the VP in. It does make a difference but I must admit its like putting lipstick on a pig compared to the differences i hear about for the TD4 mods

Hey Hippo just seen your reply, glad Im not the only one with no smoke. Did you solder or use the clips that came with it ?

I must admit to seeing no smoke regardless of settings. hmm and you say you got loads at settings I have seen none. I wonder if mine is working properly ? Ill do some tests tomorrow.

you buggers have got me worried now where exactly are you measuring from ? im measuring from the bottom of teh cylinder the wastgate arm dissapears into to the top of the nut

about 37mm, thats from top of nut to base of the gate and mines adjusted. I would therefore say that on average it should be about 40mm

If I get a chance ill look tomorrow but from memory if you turn the screw all the way to the end then 4 turns back in should be about right. Problem is ive adjusted mine so wont be as factory anyway.

have one in mine and ahve adjusted the wastegate, decatted and egr capped, has made quite a bit of difference and would recommend it.

I already have :) and I must say its an excellent piece of kit, realy gives DI a boost beyond what I was expecting. Fuel economy has improved as well. to add more power I have also adjusted the wastegate, decatted the exhaust, cleaned the MAF and blocked the EGR. has made a real difference to...

having recently bought a late DI ie 2000 model, while I like it, it is under powered and would defintely recommend holding out for a TD4. Your budget is right at the bottom of the TD4 range so you may well only get a first incarnaton high miler for that money. Do your research on the forum for...

As I said mine now is at close to 3000 at 70mph and is a different car to drive now that it has the proper gearbox in it. The only issue now is the fact that bloody reverse dont work, or at least keeps popping out with that awful grinding sound, so can reverse of sorts but not right. I dont...

Update on my gearbox. Installed new gearbox which I know defintely comes from a diesel. Needless to say rpm has dropped and now doing around 2700 to 2750 at 70mph rather than the 3500 I was reporting before. Its not all good news though, on the new one I ahve intermittent HDC egagement in...

Youll have to let me know how you get on as I may have to do the same. Goign to try and get this mess sorted on monday but I need the proper gearbox as I do a lot of motorway driving

its looking that way matacaibo. I have now found exactly what I need to check and im goign to get the garage to check the gearbox on monday. if you look at my Gearbox thread you will see I have posted a lot more info their. How har dis it to do a gearbox yourself?

found this for those who are interested Gearbox identification This overhaul manual is applicable to PG1 gearboxes having the following Serial No. prefixes: S4EM - 1.8 petrol engine model S7EMU - Diesel engine model apparently the U stands for uprated which is for the shaft being thicker and...

droid interesting information can you post up your findings from Rave. I have done a quick search through the forum but cant find any info telling me different at the moment. Perhaps a poll is in order for all us XEDI owners :)