Recent content by Roblister

I have found the problem the tee piece has snapped off so the hose to servo is not connected It felt for suction at broken tee piece and it was strong. So now next problem is how to get this repaired as I can't find any place that stocks tee pieces or the hose

Is this the pipe to remove if so how does it come off? it seems to be a metal pipe with master cylinder attached

Thanks for that. Will have to look tomorrow pouring with rain here now. Will update you Thanks for all the help you have given A God send !!!

No the brake pedal is hard all the time If I pump the brakes it makes no difference

I don't know which pipe you mean to pull away

I don't know which pipe you mean to pull away. The brakes are hard now all the time ie very little pedal travel

I have a Discovery2 2004 Landmark. Recently the brakes have gone hard to push down and difficult to stop without standing on the brakes. The callipers are all fairly new (last year and genuine Land Rover parts) and pad and disk are in good condition again renewed end of last year. It seemed to...

Well I went out this evening and found the blue and white were on wrong way round. Connected up as you said and away it went. I am very grateful for your help Thanks a lot !!!!

Thanks very much for that info. Will open drain and see what happens and double check lines as per your guidance. Will post results tomorrow hopefully with a positive result

I have just replaced the 4 lines from the tank and the girl won't start Have been trying for 3 days now. Can anyone help with the layout and colours of the lines going to the filter as I am now not 100% sure I have connected them up correctly. The attached photo is what I have connected up to...