Recent content by Prith

Thanks guys

Hi The seal has a flat surface and a round bulge to it. like a letter " d ". Should the bulge be at the bottom like " d " or should the bulge be on the top "p" Is the seal riveted or bolted? Should there be any gap when the door is closed I seem to have a big gap between the sil and the door...

I do not want to remove the old one out till I can get a quote from a supplier here and if he can give me the exact dimension and thickness. Its quite easy for me to take it out and then just give the original. Just do not want to take a risk. Better to get the new glass in hand and then do the...

Hi! Guys, My 1991 Defender 110's windscreen is full of scratches and I would like to replace it here in India. Does any one have the correct template or the exact dimensions of the glass and the thickness. It will be easier to get a new replacement made here in India. Appreciate your quick...

As I never carry any heavy load I will go in for the 6388 & 7000 even though I do not have a self levelling device.

But 6389 ^ 6904 are heavy duty for non levelled suspension. I do not want Heavy Duty springs. My question is can I go ahead and use 6388 & 7000 which are STD springs but for levelled suspensions.

As per the parts catalogue: Front: Rear I do not want to waste money again by buying HD springs. Paddocks says that 6389/6904 are not HD and are ok for the 110. Cant I replace my OME2752 springs for the NRC 6388 & 7000 standard springs even though I do not have a levelled suspension?

As mine has the Old Man Emu 2751 front and 2752 rear there are no colour bands. I meant my ride is very stiff and not soft. I would just like to replace the OMEs with the stock standard (normal duty only) springs that come on a standard Defender 110 station wagan.

No I do not have ARBs but will plan on putting them later, not now.

Not sure as I had changed in about 4 to 5 years back. Not done over 6000 km too in that timespan

Hi! Did a small trip of 500km and came back with no issues whatsoever in the 110. Next morning wanted to take the Landy for a wash and noticed that the Clutch was acting in the last 25% of its travel and not fully. Its got a Redbooster Servo. Somehow managed to drive back even though it was a...

Guys what is the softest springs I can use for a Def 110. I presently have the OME 2751 (front ) & OME 2752(Rear) still I am not getting a comfortable ride. My Landy is a stock 110. Just a small bullbar & tyre on the bonnet. No heavy towing or loads at all. I want a stock suspension springs...

Thanks a ton James.

How does one the timing of the pump and the flywheel with the engine in on a defender 200tdi. Saw chris's Landrover ToolBox videos and it looks so easy as he does it with the engine out. How does one know where the pin sits exactly on the flywheel slot. Getting the pin in the pump is not...

Dont even know what it looks like. Atleast if I had someone's unit then I could get it fabricated. Surprised that there are none available? Even if a 2nd hand one is available will get it.