Recent content by poreilly101

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. poreilly101

    84 Landrover 110 - Revamping

    Now that took some time... It's back after a very very long time....
  2. poreilly101

    Adding Oil Pressure and Oil Temp Gauge...

    And her was I loving my manifold... The temp gauge is not a must have, more of a nice to have
  3. poreilly101

    Adding Oil Pressure and Oil Temp Gauge...

    I do have an oil cooler fitted to the engine. I did think about that with the oil flow, It may be a problem.
  4. poreilly101

    Adding Oil Pressure and Oil Temp Gauge...

    Hi all, With the restore of the Landrover 110 coming to an end, I wanted to add a Oil Pressure and Oil Temp Gauge. The issue I had I had no where to tap into the engine. I got the below manifold made with a high pressure pipe from the engine where the Oil Switch was located. This will in...
  5. poreilly101

    Door Locking options on a 1984 LR 110

    I'll be left with a hole if I get the same one as the front locks. I was going to replace the barrel of the back one... It looks like it could be the way to go? Question is - which barrel ?
  6. poreilly101

    Door Locking options on a 1984 LR 110

    Last question - I promise What barrel do I need for the back door... It's an any burst one i'm guessing. Can anyone help with the part as i'm going to put an order through on paddocks today
  7. poreilly101

    Door Locking options on a 1984 LR 110

    Ok - Drilling is a no no.... That's the other side of it... If i just change the drivers I'll be laughing. I'll check to see if the locking mechanism works
  8. poreilly101

    Door Locking options on a 1984 LR 110

    Do I just drill a hole and replace the barrel ..... Not a fan of drilling... This is my striker attached... Am I crazy to go back to the older version?
  9. poreilly101

    Door Locking options on a 1984 LR 110

    Am I right with these?
  10. poreilly101

    Door Locking options on a 1984 LR 110

    @Hicap phill - Am I right in saying that they are the locking system I need? Looks like I have Series III doors so?
  11. poreilly101

    Door Locking options on a 1984 LR 110

    I see this is on paddocks - The barrel looks in the perfect place to meet the contour for the barrel. https://www.paddockspares.com/337802-door-handle-with-lock-lh.html
  12. poreilly101

    Door Locking options on a 1984 LR 110

    Useful post I found... Series 2/2a/3/90/110/Defender doors are all the same shape with the same boltholes for the important bits. A summary of the door types is as follows:- Series 2/2a - 2 piece (except rear & side rear of five door 109). Only significant change in late production was to the...
  13. poreilly101

    Door Locking options on a 1984 LR 110

    I have doors that separate. There is a bottom section and then the window section so they are two separate pieces.
  14. poreilly101

    Door Locking options on a 1984 LR 110

    No fancy door cards with me...
  15. poreilly101

    Door Locking options on a 1984 LR 110

    That door is - YES
Back
Top