Recent content by plumbfisher

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. plumbfisher

    P38A Injector not sealed properly?

    I've been having some bother with leak off pipes (separate post). Now sorted I hope, replaced with decent Gates pipe. However, the last time one went the well around no.1 injector filled with fuel. I replaced the pipe and mopped up the spillage. Fired it up to see all was well and noticed...
  2. plumbfisher

    P38A Wash wipe - here's a strange one!

    Thanks - I'll have a look
  3. plumbfisher

    P38A Wash wipe - here's a strange one!

    Here's a strange one. I've search Rave and can't find even a clue! When I turn the key to position 1 the wash wipe comes on. The cycle can be cancelled by moving the stalk but then wash wipe(s) won't come on when I press the button(s). Can't find anything with Nanocom either...🤔
  4. plumbfisher

    P38A Spill off pipes.

    Thanks again for your help. Gates pipe ordered. Haven't done the flow test yet, don't know really how much I should expect to get. Presumably it increases with revs. Can't think there's a duff injector 'cos it runs smooth and sweet (even when ****ing diesel!)
  5. plumbfisher

    P38A Spill off pipes.

    Thanks Keith, So is it possible that there is a pressure build up, or does the FIP take in the returned fuel, according to throttle position, and then any excess returned to the tank?
  6. plumbfisher

    P38A Spill off pipes.

    'Morning all, spill off pipes leaking again! Thought I had them sorted and then another one goes. Question is - might there be a pressure build up? should I be able to blow through the return pipe to the tank? (ie is it just an open pipe?) And why does it go to the banjo on the FIP first...
  7. plumbfisher

    What did you do with your Range Rover today

    Sorry, I missed what the problem was originally but I'm intrigued... which wee green sensor? sounds like a magic fix!
  8. plumbfisher

    P38A Glowplug timer/ temp sensor

    That'll suit me then...:oops:
  9. plumbfisher

    P38A Glowplug timer/ temp sensor

    Yes please! I have previously done the FIP adjustment using dial gauge and nanocom, quite a faff. Not sure either how to identify and remove the hot fix... nothing obvious to see
  10. plumbfisher

    P38A Glowplug timer/ temp sensor

    'Morning, The previous 2.5 I had, glows would not come on once the engine was warmed up. This one, they come on every time regardless of engine temp, and when I got it I was told 'always wait 'till the glow plug light goes off before starting' Has the timing of glows been messed with? Is this a...
  11. plumbfisher

    What did you do with your Range Rover today

    Am I missing something? (not unusual...) What is hydrogen treatment?
  12. plumbfisher

    P38A Radiator Woes

    Hi Nick, I have no affiliation to either of these firms but can highly recommend getting a Nissens radiator from Arksglobal. The one for my 2001 2.5 DT (part no. 64309) was £108, and delivered in a couple of days.
  13. plumbfisher

    P38A Voltage drop?

    Thanks for your replies. I've done what you suggested Kermit. Yup! 14.7 very briefly, then back to 13.8. I think this is a classic case of me suspecting that there's something wrong when there's not! Comes of years of having a P38 I suppose :oops: Both batteries are fully charged most of the...
  14. plumbfisher

    P38A Voltage drop?

    Thanks I'll try that when the rain stops ;)
  15. plumbfisher

    P38A Voltage drop?

    'morning all, excuse long post - trying to give all the info. I have a second battery and split charger fitted. When the second battery was charging the voltmeter (on the second battery) used to show 14.75 v and when the main battery was charging a meter showed 14.75 too. All good. Then I...
Back
Top