Recent content by P38_Ireland
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
So, I came across this stunning example of a multimedia upgrade on a US based forum. Ive tried to contact the owner to try get a 3D printed part that he produced but no joy so far. So Landyzone fans. Is there a way we can get together and recreate this?
The link to the original post is here...
-
Hi,
Have a 2001 P38 4.6 auto and engine oil leaking from the bell housing. Im assuming its the rear crank oil seal.
No ive looked up a few bits and the "offical way" includes using LRT-12-095
Is this actually required? can it be fitted without it?
and also the oil seal ERR2640LR happy...
-
cheers guys, forgot about microcat. back in the day my machine was too new to run it, I since aquired an old toughbook for diagnostic work and it installed flawlessly. really looking forward to getting stuck in to this project
-
LADIES AND GENTLEMAN!
I hope you are all well. after many years woithout a P38 I bought a 4.6 thor last year and am just putting it back on the road. it needs a very small bit of tidying ball joint etc. now my memory is a little fuzzy to back 10 years ago when the P38 was my daily driver and i...
-
-
Hi all,
2 questions!
1) Does anyone know what these numbers are? (circled in red) do they relate to the spec or antyhing?
2) anyone know where I can get a replacement made up?
-
Oh, sorry. Well let's say it defo wasn't me who Came up with it but hey we're all friends and if it helps someone sometime then mission accomplished
-
Hi All.
Ive had a Nanocom unit for a few years now and recently upgraded to a P38, I went on to the website and while purchasing new licences i noticed the price of the new cable. €52 for the green cable + shipping €24.47 = €76.47 + VAT = €94 delivered, now thats on top of my €184 for a new...
-
-
Hi all,
just thinking about future proofing my P38, it didnt come with an EKA code from the previous owner. is there a way for me to retrieve it say using a Nanocom or should i go to Land Rover Directly? its a UK vehicle and ive just imported it to Ireland so I wonder if i should go to someone...
-
fixed!! When I was checking cables I disconnected the transferbox ECU and under the loom was a white male block connector just lying there. I looked around and saw a female connector beside the EAS relay empty, connected them together and hey presto gearbox up and running, selectable between...
-
Thanks for the advice. I will look in to this
-
Thanks for the reply. Well the MAF sensor can wait for another day. Open circuit, I assume this simply means it not getting a reading from the transfer box? So could be a broken cable or maybe a duff transfer box ECU?
-
Yes the battery is very new and in excellent condition. I even left it on trickle charge over night and was at 14v this morning.
-
Greetings my old friends!!
I was the proud owner of a P38 for many years and recently jumped back in the saddle with a blind buy in ebay!! lol
So, its a 4.6 Vogue and it has a "gearbox fault" when the key goes in the ignition immediately, after starting it up it goes in between forward...