Recent content by Otto

Thanks ratty, I'll give Ian a tinkle. Regards Otto

Thanks for the comments guys. Got under the 110 today, the UJ on the front propshaft is shot. Can anyone supply me with one of these sharpish? Regards Dennis

Thanks for the replies, I used the car for work today and the noise has increased to a high pitch when under load i.e When accelerating, vibrating quite a lot. Had the UJ replaced on the transfer box about a month ago. I replaced the rear oil seals last week on the 110 and noticed the bearings...

Hello group, my R Registered 110 has started vibrating quite severely recently. I noticed a strange noise coming from underneath last weekend, it was like consistant knocking, yesterday when I went to work the 110 was vibrating when I got to 50-60MPH, so much so that it rattled one of the...

Does anyone know who can supply a set of rear salisbury hub gaskets, Tried Craddocks but they want over 5 pounds for delivery for something which could be posted for the price of a 1st class stamp. Regards Otto

Oh shucks, I knew someone was gonna suggest that! Cheers JPS

Well the weather improved yesterday so I got to work.. Most important tool in the lower left, yep the good ole cuppa! Brake caliper with pipe shown Brake pipe connector sitting on top of rear Diff The leaking kink in the pipe Caliper end loosened off Old pipe removed...

Thanks bustersbus, I'll let you know how I get on. Regards Otto

I'll let you know how I get on after the weekend 08mckerp, I've never replaced one before, but I've managed to get all the spares, just waiting for the weather to improve, before the grace of God go I. Regards Otto

I already found this bustersbus, its really good of you to supply the information for us all. However, my axle has disc brakes attached, not the drums as on the photo's, would this make any difference? Regards Otto

Does anyone have a link on changing the hub oil seals on a salisbury axle, mine are shot and need replaced, but I don't want to start something I can't finish. Regards Otto

I know biggles, I know....

The cover plate actually wasn't that bad, its just covered in waxoil, managed to get a replacement from the scrappers of an old V8, done the job. Just waiting on info for my new hub seals and all should be well. Regards Dennis

If your thinking about screwing the filler plug all the way in to the rear diff housing, then observe the following pictures, it may just save you hitting yourself over the head with a wrench. Rear salisbury axle, note the plug has been ripped out by the diff, stripping the threads, also...

Thanks for the prompt reply, the pipe I'm replacing is already copper. But the one I've taken off looks like a bubble flare, does this seem right?