Recent content by ossie

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. O

    Gearbox suffix

    Thanks all for the info.
  2. O

    Gearbox suffix

    springdon, There is a lot of wear on the synchro teeth but I am sure they are parallel. So the 31 teeth on first means it is not a suffix A ?
  3. O

    Gearbox suffix

    Getting technical now, I have a bush on reverse gear not a needle roller. 31 teeth on first gear mainshaft and 13 teeth on layshaft. 21 teeth on reverse gear
  4. O

    Gearbox suffix

    Thanks for that...No visible stamping on the gearbox though. Sods Law!
  5. O

    Gearbox suffix

    Hi, my series 3 g/box has failed and I need to source a lay shaft but I have to know what the g/box suffix is. Where do I find it?. It is a series 3 box in my 2a so no idea of the year. There is no ident tag on the bell housing. The lay shaft bolt came loose and the subsequent end float damaged...
  6. O

    2.5 N/A Alternator bracket

    Nobber, PM sent
  7. O

    2.5 N/A Alternator bracket

    Thanks guys, no power steering just the alternator. It is a ex WD re con and I am sure it is a 19J block
  8. O

    2.5 N/A Alternator bracket

    cheers nobber
  9. O

    2.5 N/A Alternator bracket

    Have fitted a 2.5N/A to my series 2A, I am having a bit of difficulty getting my mits on an alternator bracket. If any of you Defender men have one for sale please let me know. many thanks :)
  10. O

    Spring hanger dimensions

    I believe it is 45.25 inches between chassis hangers.
  11. O

    2.5 N/A injeector pump

    thanks for trying, what bottom hose did you use for your series with a 2.5. ? Standard 2a or made up jobbie
  12. O

    2.5 N/A injeector pump

    Thanks,
  13. O

    2.5 N/A injeector pump

    just in case anyone needs to know. I have been informed by a fuel injection pump tech that they are 9/16 unf. To obtain a fitting I have found impossible so far. I have a friend with a lathe so he is going to make some out of 9/16 unf set screws. I have tried the set screw in the thread and it...
  14. O

    2.5 N/A injeector pump

    Sam, I have measured with a vernier and it would seem to be 1/4NPT parallel. The lift pump was easy 1/2 unf but I am still not too sure about the injector pump as I haven't got too much info on NPT. There is only one tpi difference between npt and bsp. Less than .5 of a mm on diameter. NPT is...
  15. O

    2.5 N/A injeector pump

    I would like to know what size and thread the fuel pipe feed and return are on a 2.5 N/A injector pump. What is currently fitted is a total bodge and fuel leaks galore. I was told 1/2inch unf but that is not correct. Also the lift pump please. Appreciate if anyone can help.
See more
Back
Top