Recent content by nismoit

Good afternoon, i'm converting a 1993 RHD Disco 1 (vin KA04xxxx) to left hand drive. I can't read axle code, however it is 10 splines and half shaft is equipped with ABS trigger wheel. Axle is now fitted at right hand side with swivel pin housing shown in pics, it has oil lubrification (3 oil...

Good evening, i'm converting a 1993 RHD Disco 1 (vin KA04xxxx) to left hand drive. Car is now fitted at right hand side with swivel pin housing shown in pics, it has grease lubrification, no ABS and it lacks of redundand steering arm, so need to change it. All measures are shown in pics...

Tnx for suggestions. I also thought about putting showers on left hand engine mount , but after this engine will be not leveled and i don't like it too much 4.6 block have same external dimensions ad 3.9 and i'm sure that those janspeed manifolds was previously fitted in disco 1 efi (they have...

Good afternoon to all. I have an issue fitting janspeed exhaust manifolds in a 4.6 v8 tomcat 100 (disco 1 based) and maybe you can help me. The right hand manifold exit stays more or less 10mm above crossmember, which is the normal position i thing. Differently, the left hand manifold exit stays...