Recent content by neo2

Hi Guys thanks for the information you were indeed correct the passenger wheel box was correct and the drivers was fitted the same as the passenger so after a bit chew on ive managed to get it swopped round and they both now work perfect thank you very much chaps for your input i just couldnt...

Hi guys I’m having an issue with my wipers on my 83 series three restoration. The issue I have one wiper is totally opposite the the other one so I’ve got near side wiper working perfect and parking correctly but the drivers one is at full sweep when the others parked or at the bottom. They...

Nodge i will have to try and find an exploded diagram on the free lander two front assembly as you could be right something might of been left out to me purchasing the car and its just been reassembled the way it came apart when done the second time..

Mine is easy to source the noise from its the spring spinning on the shocker seat.. What happening is if someone sits in the car and turns the steering the spring itself must sort of wind up and say after 30deg of turning the spring itself jumps on bottom spring seat that's welded to the actual...

Hi guys ive a Freelander 2 as a daily driver and ive just bought it to be fair, And since ive got it one side of the front suspension is making a bonging noise when station or parking and turning the steering, So i had a look while someone turned the steering to find the spring itself is...

Thank you guys that really helps i was having a nightmare working out how it fitted makes sense now.. Thank you..

Hi guys does anyone have any pictures of how and where the brake servo vacumn tank mounts on the inner wing, Iam on about the 12" black metal bottle that is the vacumn resovior, I never took it off and ive a windscreen washer bottle to fit there too, just cant seem to get the room for both...

Thank you...

Im rebuilding what was a part finished restoration of a 2 1/4 diesel series 3, and i am a little stuck on the location of the wiring is there part of the dash loom that runs from the drivers side across t o the passenger side blower then out the bulk head grommet to the engine bay if so where...

I think I've found the answer i was looking for it appears at the end of production of the series 3 the late built cars were starting to use the 90/110 parts as they were running out of parts it appears mine has the later 90 style rear light set up which might be about right i suppose i will...

I was trying to work out if its got the wrong rear end on or it was correct as I've only seen a couple the same, my chassis number is a late one i believe at 190### and when I've done some revision online it appears approx. 192,000 series 3 were ever built so i just was curious more than...

Mines a 1983 Y REG series 3

Hi guys sorry if i am asking a dumb question here as i am new to series landrovers im restoring one and ive noticed my tail lights are different to 99.9% of all the other location wise most are like the top picture but mine are totally different one at top and one at bottom of rear 1/4 panel why...

Hi guys 6 months ago i bought my first land rover ever a Series 3 88" wagon from a guy whom had started a very through restoration who then got bored about 70% of the way through, Ive bought this and over the last 6 months tried to finish it off with the help of the series manual and parts...