Recent content by mudmuncher
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
M
Fitted raise axle breathers to mine !!!
-
M
Hi all
On a 1986 90 which has a 2" lift when i come off the throttle i have a really bad vibration/grouching noise coming from the back of the landy
When accererating there is no vibration or noise at all but as soon as i lift of the throttle to change gear or just slow down i get this loud...
-
-
M
Hi all
I really want to fit a oil pressure gauge into my series 3 (200 TDI engine )
Should i get a electric one or a capillary one ??
I take it i need to use a adaptor or a tee piece adaptor on where the original oil pressure sensor is, does anyone know one that will fit or what the thread...
-
M
Cheers guys
If anyone has on here has a parabolics/pro comp set up please let me konw your views
I would be really interested in hearing them before i make my mind up
Cheers Chris
-
M
The blades are running freely i just checked
If i up the size of the wire and used a 40 amp fuse would that be ok or is that not really the thing to do ???
-
M
Hi all
The series 3 has got parabolics on it now (2 Leaf front and 3 Leaf rear) but i am running standard shocks all round.
I am thinking of getting a set of Pro Comp XL , would it make the ride any better on the road and would it perform better off road ??
Many thanks chris
-
M
Cheers guy
I will try the relay first see if that cures it .
Now for the embarassing bit -
What sort of relay do i need ?
How many pins etc ?
Also where abouts does in go / how to you wire it up ?
Sorry for all the questions :o
many thanks chris
-
M
Hi all
I have fiffed a Kenlowe cooling fan to the series this fan is a old style one which came out of a disco but appears to work fine .
I have wired it directly to the fuse board with no relays or resistors etc
The problem is when i turn the fan on the the fuse (35AMP) bends and after...
-
M
Hi All
I have just a 200 TDI engine into my series 3
What grade oil does it need ??
Is it synthetic ??
How much oil ??
Many thanks in advance
Chris
-
-
M
Hi All
I have just a 200 TDI engine into my series 3
What grade oil does it need ??
Is it synthetic ??
How much oil ??
Many thanks in advance
Chris
-
M
Hi All
I have brought and am currently fitting a 200 TDI to my series :D
I am going to change the cambelt at the weekend i just wondered is it a case of dont move any thing and make sure the points all line up , or do i need special tools etec ???
Many thanks all
Chris
-
M
I have a good 2.5 N/A coming up for sale if your interseted
Good condition 86000 miles
New cambelt, alt, starter, glow plugs
Chris
-
M
I am fitting it to the series 4 speed gearbox at the moment i have a 2.5 n/a diesel so i think i have done the nessersary bits iso it should fit with a bit of luck
The engine is coming complete with rad, intercooler, and a oil cooler.
Thanks for the info on checking the engine
many thanks