Recent content by muckymaddie

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. muckymaddie

    prop too short after fitting parabolics

    the 90 prop is apparently 2" longer so am going to try one this weekend! Let you know how it goes
  2. muckymaddie

    200tdi convertion Routing intercooler

    Was looking at this landy the other day on ebay very nice job!
  3. muckymaddie

    200tdi convertion Routing intercooler

    looks very tidy!
  4. muckymaddie

    200tdi convertion Routing intercooler

    Thanks Any pictures?
  5. muckymaddie

    prop too short after fitting parabolics

    Thanks all how much longer is the LWB one could be the answer!
  6. muckymaddie

    prop too short after fitting parabolics

    As the title says, after fitting some parabolics with extended shackles i have now found the front prop is too short! Anyone else had the same problem? Can you buy a prop that is about 40mm/ 1"1/2 longer? (series III)
  7. muckymaddie

    200tdi convertion Routing intercooler

    am interested to see and hear how others have gone about routing intercooler in series landy mine is in and working but i am not happy with it as it geos round top of shocker and possibly ctches on wheel! Many thanks Edd (series III)
  8. muckymaddie

    What is the best sealant for landie roof's?

    Thanks all I have ordered some "Tiger seal" off fleabay will see how it goes!
  9. muckymaddie

    What is the best sealant for landie roof's?

    Hi was going to have a go at my leaky gully's on my series land rover just wondering what the best sealant to use. It was previously siliconed but that seems to lift and peel after a while someone showed me some German stuff at a classic car show onetime but I can't remember what it was called...
  10. muckymaddie

    New Question!

    Not too bad still sucking air in somewhere on the fuel line tried adjusting timing today but didn't dare turn more than couple of millimeters but did seem to be smoking slightly less!!
  11. muckymaddie

    New Question!

    Got 1 yesterday! But there is still quite a bit of white smoke any suggestions
  12. muckymaddie

    New Question!

    lovely! Thanks. Let me know
  13. muckymaddie

    New Question!

    cool. Does it come straight out of the lift pump or has it got 90degree bend(the 1 I need) otherwise it will be in way off accelerator!
  14. muckymaddie

    colour change

    I'm guessing you won't be using a roller then!
  15. muckymaddie

    New Question!

    :confused: Hey all I need a new pipe from the lift pump to the fuel filter 2.5l N/A (mine is sucking air in and letting diesel out on the lift pump end). After browsing through the paddocks parts list tother day I don't think you can buy 1 off the shelf.... So where can I get it? Do I have to...
Back
Top