Recent content by mitchtd4

Latest update on icarsoft. after sending them an email explaining my disappointment with their product and technical support ( of which they boast about in a lengthy blurb attached to their reply emails ) they send me an email telling me to try the abs 2001 onwards option. I mean duhhh...... do...

Update on i930 issue After emailing icarsoft 3 times over 3 weeks I received an answer from their engineer. which reads Thank you for your email. Engineer said as it need security verify to test your car, I'm afraid i930 can not test ABS system of your car . Sorry about that...

I've had no reply from icarsoft since yesterday so will try again tomorrow. I'll ask them about the teves 20 as suggested. Cant see any ecu under my seats, but there is a black box mounted on the front of the abs pump. Could that be the abs ecu? Regarding any stored trouble codes preventing...

Do I disconnect the multiplug on the abs pump to check these? Or at the diag connector in passengers foot well ? Cheers. ...

Yes, I tried every option regarding age of vehicle. I cant see a manufacturer name on the abs pump, it has a sticker on it with the code srb 000110. I've emailed icarsoft who said they would be in touch.

Thanks for all replies folks. I've tried every abs option on i930 but still no go yet. I'll check for updates as suggested. My car was built September 01 so could be bosch or teves. Would that info be printed on the abs pump behind the headlight? I'll also email [email protected]. I'd love...

Hi folks. Bought an icarsoft i930 a couple of weeks ago for my 2001 td4. It cleared a mil light that I'd had for well over a year ( which 4 other cheap code readers and the AA's reader couldn't clear ) which was a good start. It also does the srs system no bother. But it cant seem to...

Hi folks. Just thot I'd post this up in case it helps anyone. I've had the 3 amigos twice before and turned out to be broken rings on the drive shafts. But a few weeks ago they popped up again but this time with a twist. They would go out after I reached 8 or 9 mph, just like the abs light does...

Lol, have another cuppa m8, these freelanders can wind ye up, but they're worth it ... Meant to say, while it's off, u can cut out a bit to let u undo the sump plug for oil changes in the future, Cheers,

Hi mate, The undertray is held on by 2 bolts and 2 screws at the front edge of the tray. Then by 4 larger bolts onto the subframe, then 2 more smaller bolts up into the subframe. Don't worry bout the rivets, the plastic part & the aluminium part come out together. There's a plastic flap on...

Hi folks, just joined the forum, already learned so much searching thru the various threads. Loads of excellent advice & info. Hope to contribute same. I have two freelanders ( both td4, 51 & 52 plate ) to look after, mine & dad's so I'm kept quite busy :D. Cheers folks, Mitch...

Just finished changing clutch on my dad's 52plate td4 . Quite involved but not as scary as I thought it would be. Tomorrow changing oil on my own td4. It's all go.......