Sometimes the solder inside the blend motor housing on the circuit board can crack causing an intermittent fault, also as I found out recently the blend motor driver inside the hevac can give up as well😳
Doing oily bits is very rewarding and often necessary but every once in a while it’s great to add something that the original designer would have done especially where it takes some years off the appearance of an awesome ride. Again, we’ll done...
My washers wouldn’t come off but injectors were out quite few times with no issues or new washers. They’re supposed to be annealed cherry red. Maybe when the engine is toasty try a retorque ?
Here's a list of codes someone had on rr.net many years ago. I would assume from the numbers, that there are many more depending on the fault ?
(2) THE HEATED FRONT SCREEN SHORT CIRCUIT TO GROUND.
(24) RIGHT HAND BLOWER MOTOR STOP MODE FAULT...
That reminds me of a chap i used to work with at the bull centre. We had an old 1977 SWB S3 diesel which we had to use for towing the horse box to occasionally go and fetch or return a bull. It had the old hand ratchet throttle. It didn't give...
Back in the 'seventies when I was driving sand/ballast most of the deliveries were local but on occasions when a longer trip was called for cruise control was employed to relieve the calf muscles of my right leg as the loud pedal was heavy when...
Apart from playing my store of music via an FM transmitter, I never use my phone in the car, I use a tablet on the rare occasion I need navigation. I have honestly never found a use for Bluetooth.
One thing I have noticed, is the bluetooth works really well both for calls & streaming music (or internet radio) from my phone, plus phone satnav & Pioneer combo seem to get the bluetooth delay just right for direction accouncements.
The...
You cannot adjust the standard rocker arms. The cam followers are hydraulic & do this automatically.
You can adjust the height of the pillars (pedestals) that the rocker shafts are in.
You need to take measurements & then work out the thickness...
Keith,
I got two trim bits off eBay for mine, and used a Pioneer DAB+ unit. (they were definitely a lot cheaper when I bought them a few years ago)
Works really well, and I think it looks ok. Screen colour set to green only, rather than the...