Recent content by marcus18
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Hi all for some reason my last post didn't post
But it lives the key bloke bricked the ECU so I got another ECU the Land Rover guy had another go and it now lives and its spot on he is going to fit a cambelt and then the long slow wait for the V5 to arrive and then I'll be on the road
But the...
-
Its alive LLB Automotive in badshot lee did it for me.
The ECU was NBG and I gave them a second hand one and a week later its working.
-
Well the key man did his thing and fried the new ECU so another SH one is on its way and LR man is on the case.
Its all good fun one day
But it is a land rover LOL
-
Update for you all had the ECU swapped by a land rover specialist but the immobiliser didn't play the game and the land rover SDD wouldn't do it but I have a key guy coming tomorrow at do that so I'll keep you in formed
-
Well the land-rover specialist has been out and spent 20 minutes on it and says its the ECU failed so I've ordered one off fleabay that should be here Thursday or Friday and I'll keep you updated as I find out
Thanks for all you help
And all the beat for now
Marcus
-
Hello
Sorry I don't have a spare key but everyone's and the enging does start and run very well for about 1-2 seconds then it shuts down
Thanks
Marcus
-
Hello again
The battery voltage this morning after standing overnight is 12.97V
The fuel filter was changed about 3 months ago
And the fuel I just eyeballed that but that should be ok as the fuel relay is shutting fuel off when the enging shuts down
Thanks again
Marcus
-
Thanks for your quick answer
I know what you mean about Ps&Qs I even say please to Alexa and thank you to automatic doors LOL
When I did that video the battery was just off charged and with jump leads + on battery - on the engine and the diagnostics was reading battery voltage11.7V But the...
-
I have made a video of the car playing about
after the 6 clicks the engine is dead but you take the keys out and wait for about 1 minute you can do it all again
I'm starting to think it could be the ECU but I could do with some help
Marcus
-
Thanks for the quick answer
The battery is fully charged and measures over 13V engine not running but the ECU is reporting the 11.7 V
The code reader I have is a Delphi DS150E
and the fuel pump is running good and has fuel out the test point
the ECU pins are all good with no signs of water and...
-
Hello people of the internet I have a Disco 3 the problem I'm having it it starts then stops after 2-3 seconds and I can hear the flap in the NS exhaust clicking and the coil light flashing. From what I can work out it its losing power to the ECU But when the ECU is on it says the battery...
-
Do you know if it is posable to get a circuit diagram of the airbag system so I can go through it with a meter rave didn't have the airbag system in it
-
Hello thanks for the quick answer but both bulbs are good but changed them for good measure but I still have the same fault.
Marcus
-
Hello people I have a 1994 P38a with the airbag SRS light and notice on the dash screen.I have looked every place I can find even used the google and cant find the answer to.
Faultmate FCR 04016 harness check resistor is measuring open circuit. (TRW MPS TYPE1)
Or it could be 05016 the airbag...
-
Hello again
I have taken it out for a drive and all seemed to be working ok
The answer i think was the HEVAC and the pump clutch .
It didn't cross my mind to look for two things at the same time now i know the problem i can get a HEVAC any time.
But what can i say thanks to you for your help...