Recent content by landrover901989
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
L
r nose high no didn't know that... have a go tonight...... wicked....
-
L
cheers Sean il have another go at bleeding it.
-
L
im sure it is all bled properly is there any thing else that could be causing it.
Break down of the rubber hose, bent clutch fork,?
-
L
Rright when i say half a clutch i cant put it in gear with the engine running but if i start it up get it moving, i can slow down and stop with the clutch down with out it slalling, the clutch is obvoisly not quite engaging properly.
Have recently instlled new master cylinder bled it all. i...
-
L
Thhere Is A Earth Connection Behind Each Set Of Front Lights You Will Have To Take Out The Lights To See It. Clean Em Up Give It A Go..
While You Are There Also Clean Up The Head Light Connectors.
Dont Undo The Adjustment Screws........ Only The Screws Holding The Unit In...
-
L
Easiest way to fit springs ive found is when you have rock slidders undo the bolts holding the base plate on if they wont undo shear the bolt with hammer and cold chizel. BiG Chizel Big Hammer. Jack up one side of the landrover with a high lift jack until the springs pop out, remove said...
-
L
I removed mine a while back you need a special spanner or one of your own bent a bit to fit down behind the fan and stop the spindle from turning, the undo the nut as norm... i remember it being seriously tight...........
-
L
MATE OF MINE HAS A 130 which has been stretched from a 110.. it has an early transit back on it and tipping ram, heavy duty rear springs same as above, we quite oftern fill it up with logs and chips well over a ton and pull a twin axel trailer with excess of 2 ton on it.... pulls it like a...
-
L
Had a milemarker H12 Hydralic winch for about 3 years, over the last year it has had allot of use pulling out tree stumps mainly and also the odd recovery Myself and others.... using it the other day pulling out the front of my brothers girlfriends car after a crash... and you could hear that...
-
L
Right there are 4 basic ratios
1:667 in early defenders
1:4 In later defenders up to now...
1:2 In discoveries
1:1 In Rangerovers
Your best person to speak to for a recon exchange unit is Ashcroft Engineering basically all they do is landrover transmissions Diffs gearboxs and...
-
L
Hi Ya
I know that lip well there was a foot drop from the road how deep is it now?
We used to have a V6 ford in a landrover chassis built as a space framed off roader.... we used to stretch a rubber glove over the distributer cap and poke the leads through the fingers..
also wrap a...
-
L
new to the forum live in essex terling ford is still very good as you look at it path on your right. there is a big hole as you go in, right hand side is really deep 4ft left hand side 2ft under the hanging trees. depending on how brave you are depends which side you drive......
went through...
-
L
I use my landy for laning put it through some serious sh1t, been meaning to get a diff guard as i have already welded up the front axle as the diff pan had slightly cracked at the bottom where it had bent.
looking at the problem you guys are having with rusting behind the diff guard im gonna...