One of the joys of this kind of work is finding you need a new tool. Got some holes to countersink in a tight spot sourced an air drill from Fleabay.
Izzy has now moved into the garage and is up on axle stands. Coolant has been dumped and the...
I've seen a few more jobs to do while I was under there. There's a crack in the exhaust pipe near the rear silencer and the brake pads are getting thin. The exhaust was a stainless one which I fitted in 2012, so that's thirteen years it's lasted...
Well it would be rude not to spend some time in the garage on my day off, its amazing the amount of things getting crossed off the needs fitting list, exhaust, rear shocks, handbrake shoes and drum, brake lines, front calipers, clutch pedal box...
Thanks. Sadly Horseshoe Lane has a Voluntary Restraint on it to drive it West to East. Think I'll have to plan to return at a quiet time and try it the other way round though. Bit of a lack of passing places if you meet anyone, so can see sense...
If I plan a route I never know if it’s good 1 way. Do look at contours when planning.
Make a few notes about sections & if there is more about being better the other way you can reverse the map direction.
Just need to remember road junctions &...
While laning this year we also did the famous/infamous "Bastard" lane, properly known as Horseshoe lane.
It's another one of those lanes you see people driving badly on YouTube and making a complete hash of it. You can see it on the ground too...
Good driving by everyone. I often see that lane on YouTube and quite often the jacked up monstrosities make a proper pigs ear of it.
Have you got a What3Words location for it?
Yes - nice to see some controlled and respectful driving.
And very reserved vehicles that are simply capable.
Vids like these make me want to get an old 90. My wife and my bank manager say different!
Took a break from the usual Billing show this year and went to Hevingham Concours with Empire.
Beyond incredible place. Shooting, Spitfires (yes original!), Hypercars, Supercars, JCBs and a hillclimb event!
Second fasest diesel up the hill...
Todays sitrep, timing kit fitted, new thermostat and water pump fitted. New fuel injector pipes and front hubs all assembled, along with drilled and vented discs and a set of heavy duty steering arms. All in all a very productive Sunday.
After a good clean up just found out that I’ve got a r380 box, result. Gearbox attached and painted, I’ve fitted the bulkhead again with YRM stainless bolt kits. New chassis loom from Autosprarks installed and clipped to the rear chassis cross...
You can get an aftermarket one for about £55 and has done its job several times on my rocky coast farm. After a meeting with a hidden boulder it was banana shaped but had done its job protecting things further back.
Taking the body off the chassis will reveal what's good to go back and what would better off being replaced.
Things to consider, as your budget allows, and what conditions bits are in:
Galvanised body cappings
Galvanised inner sills
Galvanised...
I've had a go at the rear suspension bushes and ball joint. I last did them in 2013, so they've been good for 12 years.
I did a whole thread on this in the autumn of 2013 so I shan't repeat it here. Plus I forgot to take very many pictures...
There were two types of mounting on Brownchurch racks. One was the clamp type, which has a small section of tube welded to the outside of the leg and the other was flat feet with holes which require the gutter to be drilled. You have the latter...
I hear that a lot - but ageing parents is one thing, and the other is that life here isn't all safaris and sunsets; there is a lot that doesn't get published in the news, which is very, very tough. Everywhere seems a bit broken at the moment, so...