Recent content by kevdachev
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
K
Got a 3.9 v8 which I use just for off road. I have stripped a lot of the unnecessary wires and would like to omit the lambdas if possible. Any thoughts on this?
-
K
Trying to fit an unknown 200tdi engine in to a series 3 and would like to know where the turbo takes its oil feed from. Also I am guessing the return goes to the plug which is next to the dipstick. I think this motor may have been run as a 200di maybe as the 2 pipes seem to be absent.
Kev
-
K
Hi
Looking for a pair of 10 spline diffs if you have them.
Kev 07818412357
-
K
Hi
Looking for a pair of 10 spline diffs if you have them.
Kev 07818412357
-
K
Hi
I would be interested in the diffs or maybe even the complete axles. I have an offroader only vehicle with 10 spline diffs in which have both failed.
Kev
-
K
Went to start my 3.9 V8 special and no joy. I had power to both sides of coil but no spark. Fuel is OK. I have been told to check airgap in dizzy. ( would this start and then refuse a day later) I have also been told to check the amplifier which on this model of engine is mounted on the coil...
-
K
I have recently bought a Kreg 3.9 RR and want to transplant the engine and box into an Iveco motorhome. I am slightly confused as to exactly how much of the RR loom I will need. I have traced the engine wires from the dizzy back into the car and they end at the dash plug. I am presuming these...
-
K
Hi Guys,
I am Kev Preston and a new member to your site. I have recently purchased a Range Rover special with which I wish to use for trials events. It is not road legal and to start with I would like to visit somewhere local. Anywhere in Kent where I can have a practise?