Recent content by jwhat

Looks great, have you a build thread anywhere else? What's it like off road?

I always wondered if it was worth the extra for the alive pipe, can you update us on here fi you do get the alive one fitted?

So I went out yesterday and took off the arms again, and started to measure with a plumbline where the mounts lined up. I found one of the rear trailing arm to chassis mounts (part no is stc8606 or similar) is at an angle!!! Now I don't know whether the o/s or n/s is correct. So can anyone...

The lads on clri.net would be able to give you some advice on where to go.

They are the same length alright. I don't think there has been replacement mounts but sure I won't know until I check, so out with the tape measure this weekend. Thanks for the information lads.

Hi, My 90 is crabbing, I didn't notice until someone who was driving behindme pointed it out. I've since brought it to a laser alignment place and the rear axle is out. The chassis is straight, the bushes look fine, I've swapped the trailing arms and made sure they are torqued up properly...

Thanks very much lads.

I found a broken wire in the rubber cover between door and pillar which I soldered and it works fine now. For future reference how would I test the switch for power?

Hi, I have a 2005 defender 90 and my drivers side electric window has stopped working and I need some help tracing the fault. When I press the switch nothing happens and I can't hear the motor doing anything but I've checked the fuses and they were all fine. What else should I check before...