Recent content by jomop38

Some months ago I fitted a new Harman Kardon radio to my P38. It worked straight away tuning to available stations. However, it drops the signal very easily and I've noticed recently that the volume is quite limited on both radio and cassette (don't have a CD multi-changer fitted). I've tested...

Yes, the metal bits screw/bolt onto the plastic bits (see my pic "P38RearBumperClip"). However, I have no idea if there are different editions of the bumper. I guess you won't know until you remove the current fitting and compare it with the donor.

Absolutely. Once you've got the bumper off and understand how it all locates it's totally drama free.

This is chiefly for Kooky_Guy but others may find it useful. I removed the P38 rear bumper today and it was in fact pretty straightforward. I dropped webbing straps down behind the bumper (below the tailgate) towards the outside of the bumper. These I attached to a gatepost via a tow rope with...

Ye', I've checked out Rangerovers.net, it was their bit about having to work the bumper up and down as you pulled it back that made me wonder if there was a pin/clip locator at the end of the chassis beam that was jamming. Looks like it's just going to have to be the brute force and ignorance...

Thanks, but I'm sure these are released and it's a brand new bumper fitted only weeks ago. I can see that the fitters have even greased the spring clip blocks where they slid into the female part on the chassis. There's zero dirt. Not often you can say that about a landy. Do you know if there...

OK, all the bolts and all the torx screws under the wheel arches are removed and the side clips are released, but still the rear bumper will not move. Is there some trick I'm missing where the bumper engages with the bracket (is there a bracket) on the end of the chassis? There seems to be no...