Recent content by Johnson7781
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
J
I gathered that the hard way today. Lol. Tried with a friend to get it off and failed miserably. Taking it to the garage tomorrow . Thanks for the info.
-
J
OK. Thank you. I wasn't sure if it was safe to drive it to the garage. Tried to get off myself but I can't manage it. Thanks again.
-
J
Hello. I need a little advice. My 2002 freelander td4 automatic developed a loud grinding noise yesterday from the drivers side of the engine bay. It only makes a noise when idle. As soon as you touch the gas pedal it stops. After some investigation I've been told that it might be the...
-
J
2002 td4 automatic 3 door owner.
-
J
I made it down. The brakes and steering were very heavy but they did the job. Not towing it anywhere. It's going on a wagon bit the wagon couldn't come to my house as the road is too small. All done now. Thankfully. Thanks for the help everyone. Very much appreciated
-
J
It's an automatic. I'm going to try and do it now. Hopefully I'll still be around to tell you how it went. Lol. Thanks for your help
-
J
Hello everyone. I need a little advice. My 2002 td4 needs to go on a trailer to the garage to have diagnostic tests. At the moment it's stuck in my garden entrance. It needs towing backwards to get out then I need to go down a very steep hill so it can be collected by a transporter. Will the...
-
J
I've tried everything I can and still no joy. Had a Mechanic look at it for hours today. And he said it has no mechanical problems and that the problem is in the main computer. It needs a diagnostic tests. Is this possible to do myself with an obd11 and an app?
-
J
Thanks for your help. I was told that the diesel model doesn't have a relay but I don't know. I've looked at the wires as far as I can and it looks fine. But I can't see it for very far. They go inside somewhere.
-
J
I don't know much about fixing cars. Where is the relay? And where is the fuel cut off sensor? Thanks for your help.
-
J
I had the ign switched on. A friend came with a multimeter. And says there is no power going to the pump. But he does not know why. So the problem must be with the wiring I think. But I don't know what to do next. Thanks for you help.
-
J
I've tested the connection with a bulb and it doesn't light up. I guess this means that there's a problem with the wires/electric somewhere. Any ideas as what to do next?
-
-
J
Do you by any chance know the part number for this pump or will it be marked on the pump itself?
-
J
Do you by any chance know the part number for this pump. Will it be marked on the pump itself?