Recent content by jensencars

Hi Have a 88 RRC 3.5 EFI have had problems trying to get it to run smooth, looking in the manual there are various settings from 6 degrees before up to 1 degree before if I set it stationary to 1 degree before tdc it doesn't pick up very well from tickled and coughs back a bit, it seems to run...

Thanks will check

Hi Have a small gearbox issue range rover classic 1988 3.5 EFI auto, it's been under restoration for a while , started it weekend and went through the gears to flow the oil around whilst stationary, when I tried to go from reverse to park I had this noise which I initially thought was an...

Hi, What was your problem with the EFI system I had a nightmare with mine but after many hours have got it running im no expert but understand the system so much better now have you also had a look at ignition module on the distributor unsure what year yours is

hi all, Thanks for help yes the leads are on in the right order, the rotor arm is under spring pressure does not snap back but it comes back to were it was. I have been carrying out further checks and reading a section that says the power resistor pack 2RA mounted by the inner wing has 2 x...

hi, Thank's rocker box off both valves closed rotor arm pointing to number one... I believe if i was 180 out would be exhaust valve open I thought that myself, even got the wife to check it as I talked it through

Good afternoon new member here, I have a range rover classic 1988 with a v8 EFI flapper system in it that I have been restoring, when I bought it the engine has been rebuilt with shells, rings etc I have been doing body repairs then thought it was time to try and start it for the first time the...

Hi all just joined at present I am doing a resto on a range rover classic 1988 (serious tinworm) on the rebuild stage now have major EFI probs will post in the correct area. Thanks for looking.