Recent content by JDZ2

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    Thanks for the message. So your hinting at the timing right? I will take a look at that too. At the moment, I'm walking away from it for a couple of hours at least - it's doing my head in. It just doesn't make sense to me. It was sat for about 6 months on the street. I went to move it but of...
  2. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    Taking a look at those links now....thanks.
  3. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    Another day trying to get it started & failing! In my last post, I asked about the amplifier but I was confusing it with the noise suppressor :rolleyes: Subsequently found the amplifier on the distributor which is a 35DLM8 type. Had all the plugs out, they're all heavily wet but they all...
  4. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    I've got a tin of easy start, tried it, no difference. Taken a couple of plugs out, tried them on the engine block, both have good sparks. The plugs were wet, I can smell the easy start, that high octane fuel. I've checked the wire terminals on the coil, improved one of them & now have 12.3 on...
  5. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    OK, some sleep but thinking about the Disco in the night too! Let me refresh my thinking here. So, when I turn the key the engine turns / cranks. It's the starter motor that turns the engine initially until the engine fires...right? So, there is nothing wrong with the starter motor. Fuel...
  6. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    Thanks for the time Discool. No 1 & 2, is what I thought too. In my experience, which is limited, what I mean is, the engine will turn over, crank, & will make some effort to try to start. In this case, there is no interruption, the battery is fully charged & the engine cranks & cranks but there...
  7. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    My last post isn't completely accurate - the fob does seem to operate the alarm. Sometimes when I put the key in the ignition & turn it on or sometimes when I open a door, the alarm will go off & then I use the fob to silence the noise.
  8. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    Sorry, so I don't have the spider thing but I do have an immobiliser? The central locking fob doesn't seem to do anything. The red light on the fob flashes & I hear a kind of double click coming from somewhere in the cabin but none of the locks do anything. The driver's door lock is broken so I...
  9. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    Hi Discool, thanks for the reply. I can hear the fuel pump prime itself but don't know if there is fuel to the plugs. How do I check that? When I removed the plugs they were quite wet & so I took that as meaning that fuel was there, I could smell the petrol. No, I didn't have 12v at the coil. I...
  10. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    A '93 model with one button fob, I have now read, doesn't have a spider that needs bypassing, right?
  11. JDZ2

    Discovery 1 3.5 V8 non starting - Immobiliser?

    She started last week no problem but now just turns & turns with no attempt to fire up. I suspect it may be this immobiliser I've been reading about. So firstly, my Disco is a Feb 1993, has CATS alarm stickers in the window. It has a single button remote control with a red light on. Does my...
  12. JDZ2

    Disco 1 Tow bar plug

    ...:D point taken....thanks Stanleysteamer, they're expensive aren't they!
  13. JDZ2

    Disco 1 Tow bar plug

    It's sure to be covered here somewhere but I can't find it.... Please point me in the direction of where I can buy the plug to attach to the tow bar wire into this plug in the vehicle? Is it main dealer only? Thanks.
  14. JDZ2

    Disco 1 Tow bar fitting, rear bumper removal?

    That's useful, good idea, thanks. I'm intrigued about your lights....do you have any pictures of what you've done?
  15. JDZ2

    Disco 1 Tow bar fitting, rear bumper removal?

    Must be me!! I couldn't get a spanner anywhere near the nuts, there was no space! I have ended up undoing the single bolt holding the bumper & removing the bumper. The nut for this bolt is a welded captive nut & of course it's sheared off now so the bumper is off & needs to have the nut welded...
Back
Top