Recent content by Jaykay1987

not been in a swamp, but needs a patch of welding under the arch, so flicks all the mud up 🤦‍♂️ ... So suppose thats the next job 😂

FIXED!! I pulled the engine fuse board out, all wires going green/corroded underneath & one of the wires to a plug was snapped ... So i replaced a pin out the plug and hey presto! She fired first twirl ! Thanks for the suggestions guys!

Hi guys, My 03 disco td5 just cranks & wont start ... When the ignition is turned on there is no fuel pump activation, no ecu light & nanocom wont communicate. I also cant do the purge procedure by pumping the pedal as the ecu light doesnt come on ... I have checked the ecu plugs, all fuses &...

sorry for late reply, think ill go for the GKN one ... thanks guys

Hi Guys, I have just upgraded my td5 to a v8 torque convertor & while there, im going to change my donut ... my original donut has never been changed in the 5 years ive owned it and its only lookin a slight bit perished ... I dont want to goto a 200 prop and do away with it, as i like the...

I have the fitting kit to fit a v8 tc from ashcroft transmissions...that was always the plan, so suppose this is the kick up the ass to get the box off now ‍...ill probably just find a recon box or get my own recon'd...been a great help as always, thanks mate

Just done the stall test, it kicks into gear around 3000rpm and wants to jump over the chocks...so im guessing, its the gear box itself slipping??

Just checked faults in gearbox, only coming up with... P0722 stall speed monitoring reset it, no difference...other than when put in drive, it revved a bit, moved an inch and went into limp with M+S flashing...turn engine off & on, no limp, until goto drive and goes into limp. Under...

managed to get hold of a nanocom, gonna have a look, see what faults come up tonight acter work

I dont have a nanocom i can get hold of at the moment, so im a bit stuck...it only went into limp once, then turned off, started her up an it went off. Just i can only go thru the gears an then in into drive to drive it.

ahhh nightmare! well i know to begin with its over heated, so ill drop the oil & change it tomorrow...see what happens

Hi guys, was laning today...was all up hill for an hour ish, wheels were spinning on some wet, loose & shredded bark...Heard a big bang, all drive went, M+S starts flashing and the red transmission overheating symbol came on...So let it cool for 20 mins....Restarted it, no M+S, no temp...

Hi guys, looking for medium torque convertor from a disco 2 v8, or a p38 4.0/4.6 must be a mems. Hit me up if anyone has one for sale cheers

nows ive done it, its not too bad lol...what ive learned from this, if you check your brown plug under your seats and it has 4 wires, you can plug your seats in plug & play...If the brown plug only has 2 wires, its for heated element only & will need hardwiring in...which is easy enough.