Recent content by Iwan

I hope it's not the pump that needs replacing. Let me know how you get on after changing the sensor. Iwan.

It was just the sensor I got replaced. Before it went it was very slow at starting, I replaced the glow plugs but no luck then it just failed to start completely one morning so I took it to them and 7-8 fault codes came up so they test fitted a new sensor to it and she fired up straight away

Mine had done the same thing but it turned out that it was the sensor in the high pressure pump had failed and was blocking the fuel from going to the injectors. Cost about £300 in a land rover specialist garage

Cost me a little over £650 when I did mine a few months ago. That was for clutch kit and dual mass and labour.

Mine has that problem too. Misfire and plenty of smoke. Been told it's the injector. If not that then the valve stem seals. What colour is the smoke ?

Just wondering but does it misfire ?

My front passenger window cable snapped last winter. My fault for accidentally hitting the buttons when it was frozen. Got a new cable and motor from John craddocks for around £40. Very easy to fit. Don't think you can get the cable separate as it winds around a plastic cog and goes through a...

I have a misfire on my 03 td4 at 2000rpm. Just had it back from garage after fitting a new fuel pressure sensor in the HP pump at a cost of £350. It now misfires at 2000rpm and plenty of blue smoke, but when driving it's not bad. It's fine over 2000 or under. Garage said injector 4 was leaking a...

That's third party fire and theft too.... Don't know why I bother insuring it because it's more off the road being repaired that on the road..

On my freelander 2003 td4 sport I'm paying roughly £1200 a year on the insurance but I am 20 with 1 year no claims

It turned out to be the fuel pressure regulator in the HP pump. Just another problem of problems I've had with it. Thanks anyway.

Seems like you do need to pray to god for it to start every morning when you own one. My stomach makes funny turns when I walk up to mine every morning and feel sick when I put the key in. Huge sigh of relief when It does pop into life though.

Sorry, just slowly learning my way through. Thanks.

I have a freelander td4 2003 sport and I read the voltage of the came sensor plug should be around 9.6v in the first and second cable and 0 in the 3rd. But for some reason my first cable has 1v the second had 11.5v and 3rd 0v. Anyone have any idea what the cause could be ?

2003 td4 sport Slave cylinder leaked so gearbox had to be removed £500 Water entering boot Refused to start still unknown reason as I had enough of it. Glow plug broken in engine N/s window cable snapped