Recent content by isamyku

Hello! Do you have any photos of how this actually goes in as I am struggling to figure it out. Thanks!

Hello everyone! I have a problem with a 2006 S/C L322 with all ABS, HDC, and related lights on, loads of fault codes for lost communication between modules but main ones are RH front and rear speed sensor circuits fault. Both these sensor were replaced, yesterday I tested for continuity and...

Nobody?

Sorry, seen the error, I meant Reverse 😁

Maybe it’s in the head unit module otherwise why there would be an option to change between Wide 1, Wide 2 and Normal as well as NTSC and PAL 🙄

My point was if there is a coding option somewhere in CCF that can be changed so the head unit display the video date in let’s say Wide 2 option. Pretty sure there must be somewhere as if you can change them options from the secret menu obviously the head unit provides that option. Hopefully...

Hello everyone, I continue my journey to sort the issues I have with my 2006 4.2 S/C L322. As my camera was missing (someone has opened the housing in a very inappropriate way and has cut it off) I bought a 18mm replacement as described in a thread in here previously and have successfully...

Hello everyone! If you have read my other thread regarding the problems I had with my key and remote - I managed to isolate the problem. Turned out the key I was supplied with the vehicle was not proper for the vehicle hence it couldn't sync with the BCM. I've borrowed my friend's key (which...

Reading through the thread is a pleasure - nice to see you have done so many things and wrote about them in detail @ukadamwest. Just wondering if there are some more things you came across to note as I've seen its been a while since someone wrote here.

Some of the modules do not communicate as I have them disconnected at the moment as I am repainting the center console plastics and the HVAC and air suspension controls :D Most problematic is the VIM module that SDD cannot connect to. Regarding the timezone - I have just changed country and...

How can I change BCM from backup to master? Couldn't see option for that. Regarding the engineering key I have downloaded an app that generates a code so everything I do to CCF is under engineering mode. I am trying to download VIN specific as-built and have that fault described earlier. I...

OK - so I've tried the offline method, created that folder in a USB drive, plugged it in another computer - still same thing, when trying to download the file it gives error code 620 when downloading from DFSM server. I've also tried to update all options which are related to alarm...

That's about the only thing I haven't tried :D As a last resort I was thinking to install the unpatched version of SDD and pay for a day session on TOPix and do it that way, but was hoping to get it sorted beforehand. Funny thing is that I have searched throughout the web and I couldn't find...

Well I've tried like 15 times now, still nothing. Either there's a problem in the BCM or a coding issue or who knows what... :( Any idea where I can find an existing CCF file for a similar model to see what has been coded for it and what for mine - just to compare if there's been anything coded...

OK managed to get power pin 1 (black/red) - still no luck though, did the relearn procedure a few times and no luck. I am starting to believe it has something to do with coding messed up - otherwise why would key not disarm the alarm or open the other doors? Anyone that might any info...