Recent content by Hiddenpower

http://www.flickr.com/photos/hiddenpower/5067421797/in/photostream Sometime on the 5th of August 2012 my car was taken from me from my own front yard. Above is a picture though she was minus the warning lamps and plus a couple of offroading dings and dents. I can only assume it was some kids or...

Hey guys. So I passed MOT on Friday 13th of April. She is now up and running again and bar a couple of new belts and a nice new Rad she's going good at taking me the 20 miles to work every day without complaint. I just wanted to say thanks for all your help.

Any pics? I am primarily a visual learner so it would help out. Also I think my rear suspension needs to be reset after I dropped the axle, any suggestions? or should I just let my mechanic take care of it?

Don't be too impressed yet. Still got to get through MOT. Fingers and toes crossed.

Awesome news guys. I dropped that axle which gave me more room to get in (I also chopped the exhaust cos it was gonna go anyway). I had a look around with a straightedge and realigned it all with some draw clamps. Put in some tie bars and rebuilt it with the crossmember in the proper place. No...

Roger that I shall get some blocks of wood under the axle just incase. Do I need to demount the shockers too or will they be okay with a bit of extra travel? Am I to assume this is about strategically de-stressing the suspension components? UPDATE: I have dropped the axles, can find no binding...

I've confirmed that the crossmember is aligned and straight but do you think it is possible the A-Frame mountings were shifted by repairs from warping? If so I am considering chopping the existing mountings and fabricating some plate and bosses to relaign it all. Is this permissible MOT wise?

So put the stands on the Rails instead of the axle? I'd still appreciate confirmation of where I think the crossmember should be, just to ensure that everything is present and correct. Also will I need spring compressors? this would be a problem as I don't own or have access to any. I assume to...

Hi guys, I have an issue for my 90 which is coming round for MOT time. I have had substantial rot on the A-Frame Crossmember and have since chopped it out and tacked it back in place and put the A-Frame back with a new ball joint to see that I've got it right. Upon driving I can hear clunking...

Sounds like an idea but my stereo is currently installed in the roof lining so it may just be a bit too much work.

Hey there guys, it's me again. Was just wondering what sellers you would reccomend for Early model 90 doors? All of mine are now missing bottoms and I'm trying to find replacements so it's worth changing the seals and getting it all hunky dory again. I know paddocks do a nice rear door with a...

So with our recent bout of snow the starter failed on me. I spent the weekend before christmas taking the old one out and replacing it with a handy spare. She now starts on the button every time. I note that on the old starter the wear marks are only part way along the pinion gear indicating...

Sorted! ta Gromit.

Right. New senders been installed. She now no longer reads in the red. I am given to understand though that she should read in the middle normally. I am still getting to just over 3/4 of the guage when travelling over 60mph but it will climb no higher than that level. Returns to halfway when...

When starting into the red the engine reads at 65.