Recent content by HandyBob

Hi Nodge You seem to have done a lot of work with these connectors. I have a dead wire from 52 connector C0932 to c shift 11 in connector C0243. Do you know how to take pins and sockets out of C0243 I think its at the socket where the problem is. If the wire is broken in a non accessible...

Dead wire from pin 52 blue connector to 18 pin round plug. Can you remove the pins from the 18 pin plug? Or jyst run a bypass wire from pin 52 to 18 pin. Not sure if anything else interfaces this wire elsewhere. Thanks Bob

Yeah agree with that had freelander for 4 years and been into mechanics I never dreemed of. The car has always reported codes which representd the failure. Unless Ive i stalled a duff c shift theres something else afoot here, abs throws the c1151 can failiure with instrument can bus. I can...

Theres a good chance its not thec shift, I got this code, replaced the c shift solenoid and it wasnt the problem still working on it suspect Abs / brake issue try reaing abs codes to see if any are set Handybob

Hi Thanks for the reply, I got no replies to my first post as a newbie and couldnt see how to expand the post with no replies. Was a little puzzled incase the original post wasnt seen as Landyzone has been very helpful for other posts thought I did something wrong sorry to all out there if I...

Hi posted earlier c shift error on auto gearbox getting F4 and flashing traction control. Checked all cables and solenoids as per other member posts. No problem so changes cshift solenoid. Rechecked cables from AT connector next to ecu connector to the round connector after separation. Wire...

Hi First post Newbie sorry if Im repeating a thread. Got a P0763 code on my freelander mk 1 2002 td4 Any suggestions on replacement or diagnosis would be helpful. More info. Car starts ok runs slowly withour problem, if I manually change to second I get the above code and F 4 flashing...