Recent content by Grendel
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
G
Selling my MANTEC Freelander 1 Armour and Receiver hitch:
Landrover Freelander 1 MANTEC Sump Guard Exhaust Guard & Tow hitch | eBay?
-
G
Just rewired it. Ended up soldering since kept dropping bullet conectors.
Turns out:
BLACK = BLACK
BLUE = RED
WHITE = YELLOW.
-
G
Possibly new mechanics?
Since same old owner and over the years always been great service until recently.
This is the plug they fitted so which wires do I need to swap over?
-
G
Wouldn't mind if it was a one off but this is the 3rd cock up from my trusted garage that I've used for years in the past 6 months so time to try somewhere new I think.
I'll have a go at switching the wires over tomorrow in the light with bullet connectors since my soldering isn't great.
-
G
Mystery solved.
Bought contact clean and changed bulbs over then after giving up put the car away to notice the idiots in the garage have wired it wrong so the drivers side is on full beam when dipped and dipped when full beam should be on. :mad:
Yet another cock up from my regular garage.
-
G
Both bulbs changed at the same time.
I'll swap the bulbs over and get some contact cleaner on the passenger contacts to see if it makes a difference.
-
G
Yep checked the passenger side. Will swap the bulbs over at the weekend to see if it makes a difference. Mind you looks like they have put the headlight alignment out as well which doesn't help.
-
G
I recently had the drivers side headlight bulb plug connector replaced since it kept cutting out. Now it seems Majorly brighter than the original Passenger side. I presume this is due to it getting more power from clean contacts?
If that's the case can you clean the plug connectors so they...
-
G
I was going to ask the same.
What benefit are they since when I did take the FL off road I got a stone stuck in the calliper so they don't work as stone guards also was told they are a MOT fail without them?
-
G
Fitted new fuel pump so now have a working fuel gauge again.
-
G
Thanks for that. Better order a couple of M10 30mm bolts then.
-
G
What size/length bolts do I need for fixing the front of the undertray/sumpguard please.
I'm taking the Mantec guard off to sell and the original bolts where shorter but cant find where I put them so need to buy a couple more.
-
G
1998 Land Rover Freelander 1.8 XEi (5 Door)
130000 Miles
MOT July 2015
Good bits:
-New prop shaft and Viscous Coupling Unit 2013
-Lower Mileage Rover 75 engine fitted 2013
-New clutch 2013
-New clutch Master and Slave cylinder 2014
-New 4 x Yokohama Geolandar A/T 2013
-New...
-
G
I'm thinking perhaps the 2nd hand door lock could be faulty since they said when they plugged that back in to check everyting worked?
So there is no easy fix except taking the door apart and changing the lock again then by the sounds of it.
Mind you it needs a new driver window mech soon as...