Recent content by georgeandthedragon
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
G
So part MYX000040 is indeed called an o ring and local stealer had a couple in next day for me. A couple of quid each.
The mushroom shaped machined metal object with the hole, came out with a magnet, not lodged in fuel rail at all, however the replacement is exactly the same size as the...
-
G
No I don't have a kit per se, just part LR009732, but I guess without the crush washer.
LRDirect confirmed the crush washer is indeed the part I thought was an o ring, MYX000040, but they don't carry them.
Waiting for my local Stealer to reply before testing my Google fingers.
Still not sure...
-
G
Many Thanks for the response.
I do have the attenuator (olive thing) but I don't have the crush washer... anyone know the correct part number for that?
I previously removed the adapter and there was nothing inside, I assume the attenuator will be lodged inside the fuel rail...I didn't look...
-
G
Hi Folks
I have some confusion over the TD4 fuel pressure sensor.
Read lots and gathered the part number is LR009732.
Got a new boxed LR part from ebay but its different from the original.
Its shorter than the original.
When I fitted, it bolted up OK but fuel pi55ed out so I put the...
-
G
I believe that clutch switch part number is: XKB000022
As well as cruise control it also does this apparently:
Active Surge Damping
Active surge damping is implemented to prevent the engine surging when the EAT ECU changes gear, or the clutch
switch indicates that the clutch pedal is...
-
G
I recently purchased this little set to remove the MAF, bit TP25H in the picture was the correct size.
http://www.amazon.co.uk/Laser-5031-Torx-Plus-Pieces/dp/B004499L44/ref=sr_1_1?ie=UTF8&qid=1347302137&sr=8-1