Got this far with the CarPlay screen…
6mm ply glued in to give some structure to the plastic speaker cover, as well as a rigid base to secure to (ignore the scribbles on the wood).
Wires are down to fuse box and power is a female cigarette...
Wheel off, and there is a plastic cap on the face of the drum. Prise that off and adjuster can be seen/moved with a screwdriver (the adjuster is on a horizontal plane level with the hub nut).
Handbrake cable adjuster can be got to via the coin...
Well been busy replacing front end entire running gear and recon wheels
Replaced the following both sides front
Track control arm and gaiter
Track rod end
Shock and top mount
Spring
Wishbone
Ball joint
Wheel bearing
Steering knuckle
Abs sensor...
Got it today not had time for a good look around but
Handbrake is completely stuck ! two tyres have been slashed
The aerial is snapped only one key with no fob ☹️one parking sensor is not clicking
The mirrors are not folding the temp is...
Yes KpA. LP generally stays at same value (unless the pump is knackered). HP should be around 28000 at tickover, but rises to over 100000 at high engine load & revs.
Plenty of KPA to PSI or BAR converters online, so just let us know what your...
IIRC, LP should be around 370/380
HP around 28000
Don’t ask me what the units are - I forget, though KpA rings a bell !
Edit - others that know exactly will be along shortly…
Now that you’ve established there was no issue with your fuse or alternator 😁 - could you pop over to your ‘ignore’ thread and enlighten us all as to what it is/was that we are all ‘ignoring’… pretty please? 👍
No. I have no idea what is wrong with me, if I'm honest.
Anyway, I carried out the test as per instructions and all seems good.
Thanks for taking the time and trouble, as always.