Not used the 38 for 8 days I think as i needed a work horse as i had a house roof replacement to do so used the 110. Battery flat on the 38 this morning so that's on charge and decided to fit the new genuine tailgate seal. The difference in soft...
Measure the height of yours, early ones are longer, I've fitted an early one to mine which had the later nla originally. I can then go measure mine to confirm what you have.
Not sure if it's possible to measure the overall height with it fitted...
Just throwing it out there.....
Only one connector on the switch pack, maybe its come away? Worth a look. Side cheeks off, 2 screws each side, open cubby box, 2 screws there at the top front. Be careful!!! Plastic tabs break off if your heavy...
I bet thay are not 2 neutrals one will be a live feed as you said it was 2 way thay just used the incorrect coloured cable for the 2 way connects?
Just got to the end glad you got it sorted 👍
That light, above, isn't two way switching, that was the landing light. The two wires in that light, above, were both neutrals , loop in and loop out, live was red ,switched live was black (red sleeving) both from the one way switch. All the...
It was the two neutral wires from the next bedroom causing the issue. They were both just 'resting' in the choc block, screw was loose, everything up and running again and relieved that I didn't have to go up in the itchy loft 😬 .
The offending...
Live terminals were all correct right up to the bulb contacts, only 1 neutral on the landing , 3 terminals there, 1 from the loft space and , of course, the neutral tail from the lamp cord, @mystery has sussed it methinks. Find out tomorrow...
more info please but assume the landing light last on circuit,the bathroom light should have 3 neutral wire (fan, landing and nearest bedroom) and the bedrooms should each have two neutrals so would look at bedroom nearest to bathroom for...
I think you're right. I thought all lives, neutrals and earth's returned to the consumer unit as a ring circuit on both sockets and lights. It follows that the landing light is the last in the non returning circuit hence only one neutral. I'll...
Mates house..he's lost the landing light and the bathroom light , they are next to each other maybe 8 foot. Landing light is two way switching from downstairs. I know enough to get myself into trouble!
Anywhoo, the other 3 rooms upstairs still...
This what what Marty posted on the Nanocom forum. As of July 2024 there was no update from BBS.
====================================
Had a look at a couple of P38's with ABS problems, which have both turned out to be the wheel speed sensor...
Nope,160mph..its been chipped and has cup holders and its a dhse, H stands for high performance.
And most of the lacquer has felled orf so she's loads lighter too.
True story.
Later condensors are difficult if not impossible to get hold of new. Mines the later one, earlier ones fit with a simple mod but you'll need a new pump to condenser hose and they are c£160. Island 4x4 sell them.
I've had mine done twice, once at kwikfit, no leaks, lasted a couple of months tops. Then went to a local landy independent who found a leaky condensor(that's common) I replaced that and it lasted about 6 months so I've given up for now.
Ring do...
It is on one of them, front left iirc 😬 . I do recall right rear was a front one. Back home soon so I'll post my note up. Maybe bbs fixed it now but mine was brand new 3 yrs? Ago and that was wrong no fix on their website last time I looked...
Bear in mind that the nano isn't correct on abs sensor positions.
I've got the correct ones marked on the case I keep the nano in.
I forget which is which and I'm not home at the mo but I'll post them up when I'm back later if you like.
Well bought a can of Wynnes EGR and turbo cleaner and sprayed it in inlet pipe to the turbo. Took my time nice and steady. Wow took it for a spin and the difference is very noticeable. Quieter, more powerful overall a lot lot better. I am...
One arm is slightly longer than the other, they look identical but are not.
If you look at the caps covering the wiper arm nuts, there is a little slot you use to ping them out with a thin flat blade screwdriver.