Recent content by facy

Hmm, I am not so sure if the remapper I will use is so skilled. If I knew about all this issues I would probably rebuild my 15p engine.... Ok can you explain to me why exactly I need a Eu2 map? Is it only because of the black injectors? As I can imagine beside them all other stuff is 15p. And if...

Thanks sierrafery, your advices are priceless :) So I will put the black top injectors and look for a AAP sensor. So I can change it together with the remap. If you can just tell me which one of the wires will become useless. And is the change so simple: Just cut the 4wire plug and install the 3...

I was told that I need to change the AAP sensor with 3 wire one from 10p. Should I do this and if yes what should I do with the 4 wires plug? Which 3 of the 4 wires should I use?

The FPR is 10p. The head is marked 1999 year. It looks very weird that an engine with only 140k km had 4 of 5 injectors replaced. Anyway, I decided to give my 5 black spare injectors for a test, because I have bought them 3 years ago as a second hand I am not sure if they are good. If they are...

Just opened the cambox to replace the green injector with a black one but actually I remembered wrong. It was the black injector that’s one. Other 4 are green top. So should I replace all of them with black Or better look for one green. How can I check if this is actually a 10p head or it could...

Thanks for your advices sierrafery. I have measured the mV across the fuse of the fuel pump. The meter showed 31 mV. So I guess this means the pump is working correct. I also measured the voltage between pin1 and pin2 on the MAF sensor with engine running. It gave me about 1.6V. I watched this...

Hi tilly, thank you for your answer (question). I have not checked the car on any devices like nanocom. This sounds like the logical thing to do.

Hello everybody. I am new to this forum and until now I have been reading only. I see there are some very smart guys here who know a lot about TD5 engines. I have a bunch of non standard questions and I hope some of you can point me to the right direction. So here is the situation I am at the...