Recent content by Dover mike

i will do that at the weekend just to check thanks

ok mate thanks

yes mate

hi mate no the props was kept together i took it all apart because the dmf had worn and was giving very very bad vibrations almost undrivable to get home i was thinking the vibrations may have damaged something else

new prop shafts was fitted a few months ago and i had marked them before taking them off now all lined up and tight i have no idea what it could be

Good afternoon all I wonder if you can help I have a defender 10p td5 and have just rebuilt the r380 and as it was off replacement clutch/flywheel an lof smf and power spec clutch I marked the props where they came off all back together now but have a bad vibration at 60-75mph any body got any...

i was going to do this 1st then HD 1/2 shafts and see if that stops the jerky pickup

good afternoon all i have decided to start by replacing the transfer box i have found a disco one (LT230 A4041D ) 1.211 ratio with locking diff that's been rebuilt with all new guts and seals am i correct that this will fit my defender TD5 manual but will make it better on the motorway speeds as...

Good afternoon hope you’re all well just got back under the Land Rover and there seams a lot of play on the drive shafts the rear has more movement then the front do you wonderful people think this is a transfer box issue about 30mm of rotation on the front and about 60mm of rotation on the rear...

good afternoon all i have traced the suspected issue the transfer box has a lot of play on the drive flanges am i better getting a reconditioned unit as exchange or is there any adjustment that can be made inside the unit thanks again

very nice work mate

Engine jerking under slow speed ie trying to do 30mph in 3rd gear

Good afternoon everyone I have a TD5 defender 10p engine with an twisted performance intercooler with twin fans and a twisted engine turn and k&n filter in the original box this was all done before I purchased it and it’s very jerky at low speeds 30mph has anyone had the same issue or know how...

hi Matt its not impossible i kept looking around for ages and came across mine on FB all the dirty jobs done and i only paid 11500 for it and mine also lives on the street i use mine every day and is our only car just my wife and i with seats in the back for grandkids who love it look at my post...

hi mate im am only fitting them as i will have grandkids in the back ever now and then but its a lot of work to get the seat belts fitted nice and neat and out of the way when not needed