Recent content by Donk90

found the burned wire.It had gone from the back of the ignition switch to the block connector, just a bit puzzled at the mo a I've by passes the wire going to the stop solenoid and joined it to the alternator wire a it was in the connector. Only thing is the other wire that I assume went to the...

Haven't been in here for a while lol . Just hoping someone can help me a bit please, had a small electrical fire behind the clocks on my 1987 90. I've worked out that It's the wire from the ignition switch to the stop solenoid but for some reason I've lost my oil pressure light, charge light and...

Gear box nearly out so I shall know for definite tomorrow

Already checked there lol but thanks for the reply

Yup going to try to check the master and slave, I'm not losing pressure but was wondering whether the master might be bypassing itself when up to pressure or if the slave has seized, thanks for the reply

The clutch on my 90 with disco engine and box isn't releasing properly. When I depress the pedal it will release enough to stop the land rover moving however it is still trying to drive i.e. the clutch is being slipped and you can't change gear lol. Any advice as to what may be the issue would...

Has anyone on here mounted the air filter on the roof, and if so what sort of pipe did you use. I have a ninety with disco 300 in it so obviously there's no room for the filter in its usual place and the person who did the conversion chucked the pipe that links the filter to the intake lol...

Always wondered if a disco dash could be made to fit

I've got one beside the passenger seat

Why not put a piece of ply behind the seats

Hi I'm Donk, aka Chris. I'm 23, from mid Wales and have been round landies all of my life.

It's illegal to produce/sell them, not to fit them a I remember

Put your spare wheel ont bonnet that stops it lol

Having your spare ont Bonnet is all well and good till it falls down on yer head andand traps you lol. Trust me been there, done it but have I learned, have I hell

How did you do the front edges?