Recent content by Daz

Cheers Knappster

Hi all, wonder if anyone on here knows anyone or would be able to fit a clutch in my 2003 td5 90. I'm located in Gloucestershire and have purchased a clutch kit. I can deliver or it can be done on my driveway. Obviously will pay and provide refreshments. Thanks Darren

Cheers that's a useful tip.

Quick update and to say thanks for the responses. Long story short when I took rear prop off it had loads of play in one of the uj's, for some reason this wasn't visible when it was in the landy. Anyway replaced prop with a new one and vibration has completely gone. Thanks again Daz

I've had exactly the same on mine, replaced front prop as there was a little play in UJ's, made no difference. Checked rear prop and no movement at all, took it off and there was about 1/4 inch movenent. I put a new rear prop on and vibration has gone. Not sure why the play in the rear prop was...

I'll try that, there seems to be no play in rear prop at either end and the uj's are tight too. Cheers

I have removed the front prop and driven around this morning in diff lock high. The vibration is exactly the same (maybe even slightly worse). Not sure what this tells me or eliminates if I'm honest.

Thanks will give this a go and report back

Thanks for the reply and advice, been back under it today and things have moved on a little. The front prop is new and was put on about a month ago. There is about a 1/4 turn of play on the front prop into the transfer box but none at all on the rear. The clicking noise is still there but more...

Afternoon all, can I pick your brains on what this noise maybe please. It's only happening on the drivers front wheel no noise from the passenger front wheel. With the landy jacked up when I rotate the wheel backwards and forwards there is a loud clicking noise. Nothing appears to be loose or...

Is camping already sold out? Just looked on the site and it looks like it.

Thanks for replying. The steering feels fine and there appears to be no noticeable difference play in any of the pulleys. It’s going in the garage tomorrow so I’ll let you know what they diagnose.

So the noise is definitely coming from one of these two. I know the top smaller one Is the roller idler. Can’t find what the bigger one is called. Sorry if it’s a dumb ass question! Used a stethoscope in the area to locate the noise.