Recent content by conebonce

OK Guys - just a final update Have got the car running, and apart from the small teething issues - rad isnt any cop etc... I will be taking the car for MOT tomorrow. After a new rad is aquired from Island 4x4 in the am. Many thanks for your help Conebonce

The roof chop is acieved by taking about 4 inchs out - basically the top of the bulkhead is modified to accept the screen when shortened - and then the doors, and body are adapted accordingly There are a coupld of "squat 90" comp safari racers with NORC and the AWDC over the years and they...

OK - I have sorted this out - the problem occured due to some idiot thinking it would be a good idea to use the flapper throttle linkage and not the hotwire one - They may look the same and fit but the replacement stops the butterfly from closing properly - about 10 mins with a file and...

I have changed the Stepper motor - but that hasnt sorted iyt - does anyoine have any other ideas at all???

PS - no the black/brown problem wire is still not connected, the other thing that has come to mind is that the car was an auto and is now on a manual box - dont know if this makes a difference??

Hi guys - We have sorted out the wiring issue -= thanks very much for your help! Now the problem is that when I start the car (having sorted out the timing issues) the car revs its nuts off top the point that i have to turn it off. Are there any ideas on what could be causing this?? Cheers...

I know that John Eales do a set of cast manifolds - i think they refer to them as Dakar manifolds, they are considerably bigger than standard but better than a bunch of bananas, they are designed to fit into a landrover or similar. May be worth keeping an eye out for them on flea bay as I...

hi - May be interested but need some more info - thanks

Thanks for the answers - I do have a lead from the coil, this is wired in to the ecu just to get it running - but the wiring diagram says it should be a white and black, the inly white and black seems to go to the ignition module next to the coil, any ideas where this should be or any ideas on...

Hello all, I am looking for a little assistance. I am in the process of putting a 4.2 hotwire into my 90, it has been mucked around with previously and had a 3.5 flapper systenm in it that wasnt runnign properly. I bought the 4.2 complete with the injection and the loom for the injection, it...