Recent content by clyde

Ok it's worth a try as it might work it took me two weeks to get mine sorted and I got a nanocom. Good luck

I have heard that the EKA code will not repeat numbers but not sure some one on here might know better the then me ! Have you tried both ?

Hi I had a similar problem with mine you can try what I did you put key in the ignition and turn it to position 2 or 3 mine was 3 and enter your EKA code by putting the number in with the lock and enter with the unlock on fob. If EKA is 1234 you press lock (1) then unlock then lock twice (2)...

Yeah I agree, I will be keeping the car, spent way too much on the old girl now to get rid. Thanks again :)

Yep if you put the key in the ignition and turn the key to position 3 and enter the EKA code with the key fob, number in using the lock button and enter using the unlock button. Simple really. Glad the girls up and running, it's caused so much stress :( Hope this trick helps you all. Cheers

Update........it's running :amen: my wife's friends husband knows a chap who might be able to help! So after exhausting what I thought was every avenue, and ready to throw in the towel, I thought I had nothing to loose, so he came over, and after an hour or so......knock me down with a feather...

Thanks for reply, I am sending BECM off to rick-the-pick I will up date you with progress thanks for all your help.

Wammers do you mean change the BECM or the setting to late EDC on nanocom ?

Well spent the last 5 hr working on this problem had a auto tech out with me and we came to the opinion that the BECM is not doing as we ask. When you ask the nanocom to open a window or door lock it doesn't do anything ?? It goes through the procedure but nothing happened ?? So at a dead end...

Yea I am getting to that point Lol. But not going to let it beat me

Yes I went to main dealer to check the EKA code. I have tried it many different ways ? I can hear the BECM click when I disarm it with the nanocom as I put the EKA code in ????

Thanks Grrrrrrr, I am close to striking a match!!! Yes the drivers door does unlock with the key but not with pressing the key fob! I'll check in the morning to see if you have posted the setting. Appreciate your help :)

I did put it in the nanocom but it still no go I will go out and try all the procedures again. I can not see why it wouldn't start , the boot will open and drivers door but all the other doors are deadlocked the windows and sunroof open and the display comes up with engine disabled press...

I have taken the code out of the ECU and put it in BECM, I have take the drivers side locking mechanism and tried to put the EKA code in still nothing. I am loosing the will to live. Is there any other way of putting the EKA code in?

Also a quick question, when the nanocom asked for the code which we put in in the EMS below it it asked for the fob code, but it's empty, do you think this is the problem, do I need to get the fob code????