- Posts
- 58,170
- Location
- Preston Lancs.
All the OP should need to do on his year of car is put key in ignition and press fob.
Immobiliser lock out, advice needed
- Thread starter clyde
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
clyde
Member
- Posts
- 34
- Location
- St Austell, Cornwall
Thanks for reply, I am sending BECM off to rick-the-pick I will up date you with progress thanks for all your help.
- Posts
- 58,170
- Location
- Preston Lancs.
Ok good luck. Sure Rick will sort it if it has lost it's marbles.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,784
- Location
- Buckinghamshire, UK. ('95 DT)
Fingers crossed. Let us know how you get on.
@Wammers: if mine has EGR then it is well hidden!
@Wammers: if mine has EGR then it is well hidden!
- Posts
- 58,170
- Location
- Preston Lancs.
Fingers crossed. Let us know how you get on.
@Wammers: if mine has EGR then it is well hidden!
It doesn't, early EDC.
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
I'll sort the becm out.
The difference between early EDC & late EDC depends on what ECU you have on the range rover.
Early EDC, the first EDC produced back in 1994 requires no codes to operate the engine.
The difference between early EDC & late EDC depends on what ECU you have on the range rover.
Early EDC, the first EDC produced back in 1994 requires no codes to operate the engine.
clyde
Member
- Posts
- 34
- Location
- St Austell, Cornwall
Update........it's running :amen: my wife's friends husband knows a chap who might be able to help! So after exhausting what I thought was every avenue, and ready to throw in the towel, I thought I had nothing to loose, so he came over, and after an hour or so......knock me down with a feather the old girl started up!! Wot a relief, didn't need the nanocom at all, just a simple trick with the key!!! Wish I knew this before I paid out £400 :frusty:
N151SDW
New Member
- Posts
- 31
- Location
- South Wales
Yay!! So what was his secret with the key!?
What's that, you're only telling those that enquire if they pay £50 each??
What's that, you're only telling those that enquire if they pay £50 each??
- Posts
- 58,170
- Location
- Preston Lancs.
EMS code and BECM were not out of sync then. You cannot sync that with the key.
Last edited:
- Posts
- 58,170
- Location
- Preston Lancs.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
See post #61. Postal orders will do.
That's what my handbook says but it wouldn't work when I tried it. I needed to put key in the door lock and as it was unlocked I pressed the lock button and turned the key to lock at the same time. this resynced the system
- Posts
- 58,170
- Location
- Preston Lancs.
That's what my handbook says but it wouldn't work when I tried it. I needed to put key in the door lock and as it was unlocked I pressed the lock button and turned the key to lock at the same time. this resynced the system
Can be done either way. Passive coil in lock barrel should sync the fob and remove engine disabled message.
clyde
Member
- Posts
- 34
- Location
- St Austell, Cornwall
Yep if you put the key in the ignition and turn the key to position 3 and enter the EKA code with the key fob, number in using the lock button and enter using the unlock button. Simple really. Glad the girls up and running, it's caused so much stress Hope this trick helps you all. Cheers
Hope this trick helps you all. Cheers
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,784
- Location
- Buckinghamshire, UK. ('95 DT)
Cool. If you're keeping the car then you'll need a Nanocom sooner or later so don't go kicking yourself over that. Better to have it for when you need it urgently. I'd have been stuffed a few times without mine.
clyde
Member
- Posts
- 34
- Location
- St Austell, Cornwall
Yeah I agree, I will be keeping the car, spent way too much on the old girl now to get rid. Thanks again
