Recent content by Chrisg1

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    power steering conversion for ex-MOD Defender 110

    Ex military 110? Quite possible that the bottom pulley will have the extra grove for the power steering . All my bits came from Newbury show ground the most difficult part was the pump bracket
  2. C

    The SANKEY Project I wasnt looking for..... 03ES07 Narrow Track

    From memory there's a sodding great spring in there
  3. C

    The SANKEY Project I wasnt looking for..... 03ES07 Narrow Track

    If you're going to keep the original hitch make sure that the shaft which operates the brakes isn't bent normally bent because people forget the lock before reversing
  4. C

    Freelander 1 VCU Support Bearings – Made better.

    6006 2rs is a different width to 63006 2rs
  5. C

    Series 3 Loctite601?

    Replaced by loctite 603
  6. C

    my nato hitch rebuild

    The 4 countersunk screws should be 1/4 unf & the 4 mounting bolts 1/2 or m12
  7. C

    Battery powered impact wrench

    Milwaukee chiwf12
  8. C

    Battery powered impact wrench

    Just spent 9 months doing a m51 Sherman tank restoration using a Milwaukee 18v 1/2 drive there was nothing it wouldn't undo
  9. C

    Deestone 7.50 x 16, any good?

    I run 750x16 deestones on an Austin Champ although I can't comment on the handling they are noisy on the road
  10. C

    1983 series 3 rebuild

    It's a possibility that any other manufacturer of bearings might use a bigger ( or smaller) size of roller than the original bearings
  11. C

    indicator

    Bad earth?
  12. C

    Hi

    My name is Chris and located in Brighton. Currently own an 92' ex military defender 110, freelander 2 & Austin champ . Previously owned swb 2a 1964 2.25 petrol that i converted to 3.5 v8 , 109 safari,110 safari(got written off) 2 discovery 1, 2 discovery 2, & 3 freelander 1s all diesel.
Back
Top