Recent content by chainsaw

Thanks for that.

Thanks - great info, do you know when they stopped using the 10p engine?

Appreciated

Thanks - I'll do that and maybe someone on here who does know will come along soon.

I kind of worked that one out as well but is it suitable for reprogramming to a Defender?

Thanks and yes I would have a good idea that a used EUC from a Defender would probably reprogram for my Defender and also I appreciate there are companies online that will do this for me (at a price) but what I would really like to know is if an ECU from a Discovery 2 would be suitable for...

I have bought a non runner 2000 Defender TD5 at auction. I've discovered it has been robbed of the ECU from under the drivers seat as well as most of its relays and I'm sure the list wont stop there. Is it possible to fit and reprogram an ECU from a Discovery TD5, or what is my best way to go...

Thanks

Yes, as discodrivercumbria said: - remove them, sand them, apply plastic primer, paint them then refit them. I did mine a couple of years ago as they had become rough like sandpaper.

Has anyone put their D2 back on the original air suspension it left the factory with?

From the voltages you stated it looks like your alternator is working as it should. It also looks like the battery is OK as well so that leaves the starter motor, I would check the power and earth leads to the starter and if it still persists get the starter checked.

According to these readings I would think that all is in order. IMHO

Test at the alternator with a multimeter connecting positive on the output terminal of the alternator and the negative terminal to a good earth point. Start the engine the reading should be roughly between 13.8v and 14.2v. You could also test at the battery terminals, with the engine off take a...

Just bought a rear tub off a 2010 def 90 for my rebuild. Its metallic green and wondering if anyone knows the correct paint code. Its not unlike Epsom Green.