Recent content by BrummieYamYamRover

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. BrummieYamYamRover

    Any Midlander Disco enthusiasts interested in a small project?

    2002 TD5 MOT ran out Trying to convince myself to keep hold and fix over time but just seems a shame. I am somewhat torn because I have enjoyed driving it but the bigger picture is suggestion i should sell. Well a small layby on the road (4 car space)
  2. BrummieYamYamRover

    Any Midlander Disco enthusiasts interested in a small project?

    Hi all, Talk about multiple issues happening in a short space of time. My Series 2 Disco is needing a fair bit of TLC but I am conceding defeat in being able to carry out the necessary repairs due to nowhere to carry out said repairs (I have no off street parking), free time to do it and the...
  3. BrummieYamYamRover

    Why is my 02reg Disco TD5 leaning???

    would both level sensors on the off side go at the same time?
  4. BrummieYamYamRover

    Why is my 02reg Disco TD5 leaning???

    Yes there are springs all round. Just to clarify too, the whole side is leaning not just at the front, but I shall definitely bear that in mind thank you
  5. BrummieYamYamRover

    Why is my 02reg Disco TD5 leaning???

    Hello all, Recently I have noticed that my TD5 Disco seems to be leaning on the drivers side almost as if there was an abundance of weight all down that one side. I replaced my discs and pads last weekend and took a good look at the springs but they seem fine so I'm calling upon your...
  6. BrummieYamYamRover

    Not feeling the pressure!

    hi all sorry I haven't been back to post what has happened with my Disco. It turned out to be the HG but the heat when it blew was intense enough to warp the head itself outside of skimming regulations, ended up having to replace the whole head. Having said that, it's done the trick and my...
  7. BrummieYamYamRover

    Not feeling the pressure!

    cheers Nick. Just had our friend come and take a look, he seems to think it unlikely the HG has gone but not positive, he has noticed that there has been a water leak where the pump bolts onto the block, fairly certain that gasket there has eroded. Putting a compression tester on in the week to...
  8. BrummieYamYamRover

    Not feeling the pressure!

    I have got a LR mechanic (friend of the family) coming round to take a look tomorrow evening too so hopefully he'll be able to shed more light. I am expecting him to concur with you guys but I'll post back up on here what he finds.
  9. BrummieYamYamRover

    Not feeling the pressure!

    147k and some change on the clock. darn it :(
  10. BrummieYamYamRover

    Not feeling the pressure!

    Hi all, had my 1994 Discovery 1 2.5ltr Diesel TDi for 8 months and she's been a goliath of a machine for us...until yesterday returning from a week away with the family, northbound on the M5 just before Bristol, the temp guage shoots up and the white smoke presents itself from under the bonnet...
Back
Top