Recent content by broada28
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Cylinder head rebuilt
New valves and bed in
Valve Seals - bit of advise the slighty taller one goes on the exhaust (smaller) valve took me 2 hour phone call to John craddock
Springs - new version with single spring
And retaining collets
More to come engine wise
-
Ok quick update
After looking around online and seeing I only use her about 10 to 20 times a year and the crack is between a swirl chamber and a exhaust valve hence no coolant was being burned
I'm going to carry on and recon my current head
New valves
Seals
Springs
Collets
Rods
The works
I will...
-
-
It looks ok
But will need a new top put on it are the hard to fit.
If not Land Rover show is on Saturday in Peterborough so I can always try and get one there.
-
-
What is good way of knowing the difference?
Thanks every one
You guys are true helpers and I'm in your debt .
-
Yeah I'm looking for a new head now
There is one local but he doesn't know if it's a 2 2a or 3
Or a diesel one.
Yep.
-
-
Well more even more bad news
Found this while cleaning the head
-
Hi there
Thanks for the advise
I haven't started yet as I'm waiting for parts to arrive.
Was there marks on the bore so that i can check without taking the bottom end off.
Also how hard was it to change over to a new piston and bearings ect
Thanks for the reply as I didn't think about piston slap.
-
-
Ok
I took the head off today and found all 4 inlet rods where bent by a bit
Plus halve the valves are stuck open.
Going to do timing chain at same time.
Thank for the advise guys I will keep you informed as I go.
Many thanks
Adam
-
-
Just to update
I did as above and undid a injector at a time and found the knock disapeared when I undid the rear piston injector feed.
New injector (good make) and put back together and it still knocks and i think misfires
Rev very slowly it's fine until about 2500 then knocks until I leave if...
-
Just to update
I did as above and undid a injector at a time and found the knock disapeared when I undid the rear piston injector feed.
New injector (good make) and put back together and it still knocks and i think misfires
Rev very slowly it's fine until about 2500 then knocks until I leave if...