Recent content by bigdougr

Recently broke my rear off side bumper light lens. New cluster purchased and fitted. Been looking on ebay for a guard to put over both o / side and n / side clusters. I found some but does anyone out there know how they work? As from what I have found none of them have anything that covers the...

My W reg Freelander let me down for the first time Yesterday 18/06/2017 mini heatwave in Cornwall. While going up one of my local B rd hills the engine died, popped the bonnet, no over heating checked visible wiring all seemed OK. Got back in tried to start her she fired up, drove about half a...

Hi with my trailer attached and electrics plugged in and ignition on, all lights work as they should on car and trailer, except the indicator trailer warning dashboard light. Disconnected trailer electrics and trailer, switch on the ignition and the trailer indicator warning light starts...

Hiya, just found your thread. Purchased a shower cover last week have you any idea what the material it is made of. I ask because when I fitted it for the first time I had great problems with the cover corner Velcro, could not get it any more than a quarter of the way onto the body work Velcro...

Thanks for that Rasher, have got to work in the open so when it stops raining will have a look.

Hi my 2004 disco 2 es premium td5 2.5 front drivers side window has jammed in the closed position. Could anybody please tell me how to remove the regulator and check the motor when you cannot drop the window, have checked electrics the switch is letting power get to the motor but can't check if...

Hi manxmike I have made a copy of the LR roof fitting instructions book for my (2000) lander which came with it. Don't know how to put it onto this site, so contact me and will get a copy to you somehow.

Hi manxmike, I have a freelander 1 (2000) and the full land rover fitting instruction book that came with my lander for all the roofs, apart from the shower cover shown in the large photo that has been posted. I have printed the book in separate pages and also managed to put them into PDF...

Printed the owners fitting guide to PDF file, let me know if you would like a copy.

I have the fitting instruction manual some where will dig it out and see if I can get a copy to you some how. Also you can't fit it without corner clamps.