Recent content by AndrewFoxPitt
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
Ok guys, a little update.
I replaced the boxes + checked the original cable (all fine), put it all back on and...very little difference.
I also noticed that selecting a faster wiper speed does nothing, just the same lethargic speed as the slower setting.
I've looked at replacing the park...
-
A
Well I'll use the original cable if all's well with it, but to cut off the spindles you have to cut through the boxes :/
-
A
Yes I've purchased a new section from YRM, thanks for your help!
-
A
Yes I'll just cut them off with a cutting disc and replace the boxes and cable, around a £50 expense.
Thanks all for your help!
-
A
Hello everybody
Thanks for your advice re the footwell rust.
I've got another problem I'm currently working on - the windscreen wipers are moving very slowly (they go back into position) so I'm currently stripping the system down to the motors as detailed here...
-
A
Thanks for the advice.
I've been recommended to use a fret saw or cutting disc on another forum, would you agree?
-
A
Hello everybody
My Defender's got a fair bit of rust in the driver's footwell. Picture attached.
Does anybody have any advice as to the best course of action to remedy it?
Thanks