Recent content by alun andrew
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
Would the steel wheels off a freelander td4 fit onto a discovery 2 td5 tia
-
A
Just seen an ecu with the headline plug and play surely they have to be programmed to your key and injectors plus other specs could someone explain how it works
-
A
Fixed now thanks ceffyn followed your instruction and it done the job thanks to all
-
A
Hi all does anyone know how to turn off the SRS light without nanocom or Hawkeye or even if its possible tia
-
A
Thanks for the advice I will be making a few trips to air on the side of caution thanks all
-
-
A
Hi help needed does anyone know the load carrying wait of a td5 on springs and coils with seats down trailer is knackered and I need to pick up 45 concrete slabs just wondered if it was going to be a lot of trips back and forth tia
-
A
Thanks too all for advice a weekend in the workshop is in order I think
-
A
Thanks all for advice knowing my luck its going to be the pita job but will check other first and thanks for the talc powder trick too
-
A
doesn't appear to be any oil running from the back of the engine down the box and past the starter just seems to start about an inch above the starter motor the upper part of box and back of engine are dry and oil free
-
-
A
Yes I had the trucks on ramps washed the gearbox and underneath then I washed the engine went for a short drive nothing showing the checked again at about 150 and it was running passed the starter again
-
A
hi all i have an oil leak on my discovery 2 td5 auto no surprise there it seems to be coming from the direction above the starter motor too the bottom of the auto box anyone had similar issues if so how did the fix it thanks in advance just wanted to say all bolts have been checked for torque...
-
A
I will do thanks for your help
-
A
Hello fellow d2 fans has anyone got any pictures of how they secured anderson connectors under the headlight in the bit of trim so I can fix jumper cables to it so I dont have to keep lifting the bonnet or if they have placed the connectors in a diffrent position wont to get it right the first...